Overview
The Power Stop JBR1332XPR is a rear slotted and cross-drilled brake rotor for the 2007–2015 Acura MDX, Acura ZDX and Honda Pilot. Evolution rotors from Power Stop are mill balanced, and their drilled and slotted faces are finished with silver zinc plating.
It suits owners of the 2007–2015 Acura MDX, Acura ZDX and Honda Pilot who want a rear rotor with a slotted and cross-drilled face rather than a plain disc.
Front and rear rotors are different parts, so the axle position matters as much as the vehicle when choosing one.
Key features
- Slotted and cross-drilled rear rotor
- Direct fit for the listed vehicles
- Coated rotor
- Rounded slots that sweep water, gas and dust from the pad contact patch
- Silver zinc plated to shield against rust during normal operation
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
Rear rotors and parking brakes
Rear rotors work alongside the parking brake on many vehicles, so the hub and caliper bracket should be checked for corrosion and wear when a rear rotor is replaced. Clean the hub face so the new rotor sits flat and does not wobble, which can cause pulsing when braking.
Rear brakes usually handle less of the stopping load than the front, but they still build heat during hard use and in mountain driving. Slots and cross-drilled holes help clear debris from the pad face, and rear pads that match the rotor help keep wear even across the surface.
- Check the parking brake function after installation
- Clean the hub face and bolt seat
- Inspect the caliper slides and bracket
- Replace pads together with the rotor
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1332XPR |
| UPC | 792088927033 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It is a direct fit for the 2007–2013 Acura MDX (Base); the 2010–2013 Acura ZDX (Base); and the 2009–2015 Honda Pilot (EX, EX-L, LX, SE, Touring).
Measure the rotor being replaced for diameter, thickness, bolt pattern and weight, then compare those figures with this rotor before buying.
Year and trim both matter here. The MDX covers 2007–2013, the ZDX 2010–2013 and the Pilot 2009–2015. Check that your year, model and trim sit within these ranges before ordering.
Installation notes
Compare the old rotor against the new one before mounting to confirm the hub opening and vane design match.
What’s included
The JBR1332XPR is a single rear brake rotor and includes no additional components.
Not included: Nothing besides the rotor is listed, so pads, hardware and tools are separate.









