Overview
The Power Stop AR8768XPR is a rear slotted and cross-drilled brake rotor for the 2003–2007 Jeep Liberty (KJ), 2004–2006 Jeep Wrangler (LJ) and 2003–2006 Jeep Wrangler (TJ). Because the rotor is both slotted and cross drilled, it combines debris clearing at the pad surface with extra cooling.
The AR8768XPR is a rear rotor with a slotted and cross-drilled face, made for the 2003–2007 Jeep Liberty (KJ), 2004–2006 Jeep Wrangler (LJ) and 2003–2006 Jeep Wrangler (TJ). Check your year, model and trim before buying.
Heat management is the main reason for drilled and slotted designs: braking turns motion into heat, and the rotor has to shed it.
Key features
- Slotted and cross-drilled rear rotor
- Direct fit for the listed vehicles
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
Heat, slots and rear wheels
Braking converts motion into heat, and the rotor must shed it quickly on hills or during repeated stops. Cross-drilled holes move hot gas and air through the disc, while slots keep the pad surface clean so the friction material keeps full contact.
Rear rotors sit close to the hub and parking brake parts on many vehicles. While the wheel is off, inspect the hub for play, check the wheel bearing for looseness and clean any rust from the mounting face so the new disc sits flat.
Choosing pads is part of the same job. Pads with a compound suited to slotted rotors tend to wear more evenly, and bedding them in with moderate stops helps the new surface form a steady layer. Avoid hard stops until the pedal feels consistent.
- Inspect the hub and wheel bearing
- Clean rust from the mounting face
- Pick pads suited to a slotted face
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8768XPR |
| UPC | 792088554291 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the following vehicles and trims: 2003–2007 Jeep Liberty (KJ) (65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport); 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon); 2003–2006 Jeep Wrangler (TJ) (Rubicon, SE, Sahara, Sport, X).
Check the rotor diameter, thickness and bolt pattern against the rotor you are replacing before installing.
The covered years are 2003–2007 Liberty (KJ), 2004–2006 Wrangler Unlimited (LJ) and 2003–2006 Wrangler (TJ). Verify your year, model and trim before ordering.
Installation notes
Allow new pads to bed in with moderate stops before any hard braking.
What’s included
The AR8768XPR is a Power Stop brake rotor and is sold as the rotor only.
Not included: Any pads, hardware or sensors your vehicle needs are separate from the rotor.









