Overview
The Power Stop JBR1309XPR is a front slotted and cross-drilled brake rotor for the 2017 Lexus LX570 and 2007–2018 Toyota Land Cruiser, Sequoia and Tundra. The slotted face is meant to reduce fade, and the drilled pattern also looks good behind factory or custom wheels.
It suits owners of the 2017 Lexus LX570 and 2007–2018 Toyota Land Cruiser, Sequoia and Tundra who want a front rotor with a slotted and cross-drilled face rather than a plain disc.
Cross-drilled holes give heat and gas somewhere to go, and slots wipe the pad surface as the rotor turns. The two features are often combined on rotors meant for harder-than-usual braking.
Key features
- Slotted and cross-drilled front rotor
- Direct fit for the listed vehicles
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
- Slots keep a clear contact patch between pad and rotor
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- Coated rotor
Pad choice and bedding
Slotted and cross-drilled rotors are often used with pads approved for drilled faces, since the holes and slots change how the pad contacts the rotor. Ask the pad maker whether its compound suits a drilled and slotted rotor, and choose pads that match how the vehicle is driven. Pad choice affects noise and dust as well as stopping.
Bedding in a new rotor and pad set helps transfer an even layer of friction material to the rotor face. Use a series of moderate stops before any hard braking, and let the brakes cool between the first few runs. Avoid holding the vehicle on the brakes while the surface is still hot.
- Confirm pad compatibility before fitting
- Bed in new pads at moderate speed
- Clean the hub face and rotor surface before mounting
- Check wheel nut tightness after the first drive
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1309XPR |
| UPC | 792088917737 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Front |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It is a direct fit for the 2017 Lexus LX570 (Base); the 2016–2018 Toyota Land Cruiser (Base); the 2008–2018 Toyota Sequoia (Limited, Platinum, SR5, TRD Sport); and the 2007–2018 Toyota Tundra (1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro).
Measure the diameter, thickness, bolt pattern and weight of the rotor being replaced, then compare them with this rotor before ordering.
The LX570 fits 2017 only, the Land Cruiser fits 2016–2018, and the Sequoia and Tundra fit their listed year ranges. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilled and slotted rotors work best with pads the pad maker approves for them, so check pad compatibility before assembly.
What’s included
The JBR1309XPR is a single brake rotor and comes without other components.
Not included: Pads, calipers, wheel studs and fasteners are sold separately and must be sourced before fitting.









