Overview
The Power Stop AR8190XPR is a front slotted and cross-drilled brake rotor for the 2007–2015 Ford Edge and the 2007–2015 Lincoln MKX.
Slots and cross-drilled holes are combined on this front rotor. The slots clear gas, water and dust from the pad contact area, and the drilled holes help keep rotor temperatures up to 180°F cooler under heavy braking.
Key features
- Cross-drilled holes, which Power Stop says keep rotors up to 180°F cooler
- Rounded slots sweep water, gas and dust from the contact patch between pad and rotor
- Precision machined with Tru-Cast technology
- Runout within 0.0015 and DTV tolerance within 0.005
- Mill balanced Evolution rotor
- Silver zinc plating helps resist rust in normal operation
- G3000 grade cast construction
- Reduces fade under hard braking
- It is designed to look right behind custom or factory wheels.
Inspecting worn front rotors
Front rotors take most of the braking load, so inspect them each time the pads are changed. Look for scoring, a raised lip on the outer edge, pulsation through the pedal under braking, and thickness below the minimum cast into the hat. Cracks that run outward from the drilled holes or slots mean the rotor should be replaced rather than resurfaced.
Pad choice affects how a slotted and drilled rotor wears. A very aggressive friction compound can wear the face faster, while a pad that does not match the rotor can leave vibration. Bed in new pads and rotors with a series of moderate stops before normal driving.
- Measure thickness at several points around the face
- Check the hub face for rust before mounting
- Torque lug nuts in a star pattern
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8190XPR |
| UPC | 792088917256 |
| Product line | Power Stop Evolution |
| Position | Front |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | It is designed to reduce fade under hard braking. |
| Appearance | It suits custom or factory wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
It is a front rotor for the 2007–2015 Ford Edge (Limited, SE, SEL, Sport and Titanium) and the 2007–2015 Lincoln MKX (Base).
Listed vehicles:
- 2007–2015 Ford Edge (Limited, SE, SEL, Sport, Titanium)
- 2007–2015 Lincoln MKX (Base)
Edge and MKX years from 2016 onward are not covered, and the rear rotors are a separate part number. Confirm your vehicle’s year, model and trim before ordering.









