Overview
The Power Stop EBR1013XPR is a slotted and cross-drilled brake rotor for the 2007–2015 Audi Q7, 2003–2006 and 2008–2016 Porsche Cayenne and 2004–2017 Volkswagen Touareg. Drilled holes help the rotor shed heat during hard stops, and slots clear gas, dust and water from between the pad and the rotor.
The EBR1013XPR is a slotted and cross-drilled rotor for owners of the 2007–2015 Audi Q7, 2003–2006 and 2008–2016 Porsche Cayenne and 2004–2017 Volkswagen Touareg who want a slotted and cross-drilled face rather than a plain disc. Match your vehicle and trim before ordering.
Front and rear rotors are different parts, so the axle position matters as much as the vehicle when choosing one.
Key features
- Slotted and cross-drilled rotor
- Direct fit for the listed vehicles
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
- Slots keep a clear contact patch between pad and rotor
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- Coated rotor
Rotor replacement and bedding
Brake rotors work with the pads to slow the wheel, and slotted, cross-drilled faces are chosen by many owners for consistent feel under repeated stops. Before fitting, clean the hub face of rust and check the wheel bearing for play. A new rotor should sit flat against the hub with no wobble, and the bolts should be tightened to the torque your vehicle requires.
Bed in new pads and rotors with a series of moderate stops, then a few firmer ones, to lay an even layer of pad material on the rotor face. Allow the brakes to cool between hard stops. Because cross-drilled and slotted faces can wear pads faster in some uses, check pad thickness at regular service intervals.
- Hub face cleaned of rust before fitting
- Pads bedded in with a stop sequence
- Rotors replaced in pairs across the axle
Specifications
| Brand | Power Stop |
|---|---|
| Part number | EBR1013XPR |
| UPC | 792088917638 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2007–2015 Audi Q7 (Base, Premium, Premium Plus, Prestige, TDI, TDI Premium, TDI Premium Plus, TDI Prestige); 2003–2006, 2008–2016 Porsche Cayenne (Base, Diesel, Diesel Platinum Edition, GTS, Platinum Edition, S, S E-Hybrid, S Hybrid, S Transsyberia, Turbo, Turbo S); 2004–2017 Volkswagen Touareg (Base, Hybrid, TDI, TDI Executive, TDI Lux, TDI R-Line, TDI Sport, V6, V6 Executive, V6 Lux, V6 R-Line, V6 Sport, V6 Wolfsburg, V8, VR6, X).
Measure the rotor you are replacing for diameter, thickness, bolt pattern and weight, and compare those dimensions before fitting the EBR1013XPR.
The Q7, Cayenne and Touareg are the models this rotor is designed for. Compare your year, model and trim to the trims above before buying.
Installation notes
Rotors are normally replaced in pairs across an axle so the left and right sides wear evenly.
What’s included
The EBR1013XPR is a single Power Stop brake rotor, sold without pads, hardware or tools.
Not included: Nothing besides the rotor is listed, so pads, hardware and tools are separate.









