Overview
The Power Stop AR8645XPR is a rear slotted and cross-drilled brake rotor for 2000–2006 Chevrolet Tahoe, Suburban 1500, Silverado 1500, GMC Yukon and Sierra 1500 models, plus the Cadillac Escalade, Escalade ESV and Escalade EXT. The AR8645XPR is made for the rear axle, uses cross-drilled holes together with slots, and arrives coated.
Holes and slots share the work: the holes help lower rotor temperature in extreme braking, and the slots sweep a clear contact patch between pad and rotor to reduce fade.
The AR8645XPR suits owners of 2000-2006 Tahoe, Suburban 1500, Silverado 1500, Yukon, Escalade who want a drilled and slotted look and the cooling holes Power Stop describes, in a direct-fit rear rotor that arrives coated.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Rear rotor replacement basics
Rear rotors share the hub, bearings and caliper with the rest of the brake assembly. Clean the hub face and remove rust before mounting, since a dirty surface can cause runout even on a new rotor. Check the caliper slide pins and hardware as well, because sticking parts can wear a new rotor unevenly.
Drilled and slotted rear rotors suit heavier loads and frequent towing, but they can wear pads faster than plain rotors. Choose pad compounds to match how the truck is used, and check the rotor for cracks around the holes and edges of the slots during each service. Replace rotors that show deep grooves, heat spots or thickness below the minimum stamped on them.
- Clean the hub face before mounting
- Check rear caliper hardware for wear
- Bed in new pads with moderate stops
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8645XPR |
| UPC | 792088553652 |
| Type | Slotted and cross drilled |
| Position | Rear |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes are designed to keep the rotor up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
The AR8645XPR fits the rear axle of 2000–2006 Chevrolet Tahoe, Suburban 1500, Silverado 1500, GMC Yukon and Sierra 1500, and Cadillac Escalade, Escalade ESV and Escalade EXT models, in the trims given for each.
The AR8645XPR does not cover 2007 and newer model years, and it is made for the rear axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the AR8645XPR to the rear brakes, check that the hub and caliper hardware are in good condition, and bed in the pads after installation.








