Overview
The Power Stop AR8594XPR is a front slotted and cross-drilled brake rotor for the 2004–2008 Ford F-150 and the 2006–2008 Lincoln Mark LT. The AR8594XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
Mill balancing and Tru-Cast precision machining are part of how Power Stop builds its Evolution rotors, which use drilled holes for cooling and slots to clear gas and dust.
The rounded slot pattern, beveled drill holes and G3000 grade casting are machined to tight run out and DTV limits for the front brakes.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Before you replace front rotors
Front rotors wear unevenly over time, and the pads that run against them are often replaced during the same service. Replacing one without the other can leave a new rotor paired with pads that have a different friction surface, which affects how quickly the braking surface settles in. Many technicians replace pads and rotors on the same axle together for that reason.
Slotted and cross-drilled faces behave differently from smooth ones. The slots give gas and debris a path out from between pad and rotor, while the holes move heat away from the friction surface. Both features work best when the pads are in good condition and the hub face is clean and flat before the wheel is torqued down.
- Check the hub face for rust or debris before mounting
- Inspect caliper slides and hardware for wear
- Torque wheel lug nuts in a star pattern
- Bed in new pads with gentle stops before hard braking
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8594XPR |
| UPC | 792088553256 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The drilled holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 2004–2008 Ford F-150 (FX2, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT) and 2006–2008 Lincoln Mark LT (Base).
The AR8594XPR stops at the 2008 model year for the F-150, and it is a front rotor only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the AR8594XPR is slotted and cross drilled, new brake pads and clean hub faces help the rotor seat and wear evenly on the front axle.









