Overview
The Power Stop AR8769XPR is a front slotted and cross-drilled brake rotor for the 2006–2010 Hummer H3. Its beveled drill holes and rounded slots help keep temperatures down and the pad surface clean under extreme braking.
The AR8769XPR suits Hummer H3 owners from 2006 to 2010 who want a slotted and cross-drilled front rotor instead of a plain disc. Check fit against your vehicle’s year, model and trim before ordering.
A brake rotor is the disc that the brake pads clamp against to slow the wheel. Drilled and slotted versions change the face of that disc to move heat and debris away from the pad.
Key features
- Slotted and cross-drilled front rotor
- Direct fit for the listed vehicles
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
- Slots keep a clear contact patch between pad and rotor
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- Coated rotor
Choosing a front rotor
Front rotors do most of the work in everyday braking, since weight shifts forward during a stop and the front pads carry the largest share of the load. A slotted and cross-drilled face changes how the disc sheds heat and debris, which matters most when the brakes are used hard, on steep grades or on rough trails where mud and grit collect on the pad surface. Drilled faces can also show cracks around the holes sooner than a plain disc, so they deserve regular inspection.
When choosing a replacement, start with the vehicle’s year, model and trim, then confirm the axle position. Pads are usually replaced at the same time, and pads chosen for slotted or drilled rotors tend to work best with them. Mount the rotor clean, check that it sits flat against the hub, and bed in new pads gradually so the friction layer transfers evenly to the rotor face.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8769XPR |
| UPC | 792088554307 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Front |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
Compatible vehicles and trims: 2006–2010 Hummer H3 (Alpha, Base, Championship Series, X).
Compare the diameter, thickness, bolt pattern and weight of the rotor you are replacing with this part before ordering.
Only the Hummer H3 (2006–2010) is listed; other Hummer models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the rotor on a clean hub face, free of rust and debris, so it seats flat.
What’s included
The item is a Power Stop front brake rotor. Check the package contents against your installation before starting.
Not included: Brake pads, calipers and mounting hardware are needed separately.









