Overview
The Power Stop AR8641XPR is a rear slotted and cross-drilled brake rotor for the 1999–2006 Chevrolet Silverado 1500 and GMC Sierra 1500, plus 2000–2002 Tahoe, Suburban 1500, Yukon and Yukon XL 1500 models. The AR8641XPR is made for the rear axle, uses cross-drilled holes together with slots, and arrives coated.
The slots help degas the brake pads, and the G3000 grade casting is silver zinc plated to protect it from rust during normal use. The slotted and drilled pattern is intended to reduce fade.
The rotor combines two features: slots that help degas the pad surface and cross-drilled holes that aid cooling.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Rear rotors on 1500 trucks
On half-ton pickups and full-size SUVs, rear rotors work alongside the front brakes to control weight transfer during hard stops. A worn rear rotor can shift more stopping force toward the front, so replacing rotors in pairs keeps the axle balanced. Pad type should match the rotor surface and the way the vehicle is usually driven.
Slotted faces help clear material from between pad and rotor, which is useful on trucks that see mud, sand or wet roads. Cross-drilled holes can crack if the rotor overheats repeatedly, so check the holes and edges after heavy use. Keep the hub clean and free of rust, since a dirty hub is a common cause of vibration.
- Torque lug nuts evenly after mounting
- Inspect rear hub bearings for play
- Check rear brake hoses for swelling
- Bed in new pads before towing
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8641XPR |
| UPC | 792088553614 |
| Type | Slotted and cross drilled |
| Position | Rear |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 2002 Chevrolet Avalanche 1500 (Base, North Face, On Road Edition, Z71); 1999–2006 Chevrolet Silverado 1500 (Base, Hybrid, LS, LT, SS, WT, Z71); 2007 Chevrolet Silverado 1500 Classic (Hybrid); 2000–2002 Chevrolet Suburban 1500 (Base, LS, LT); 2000–2002 Chevrolet Tahoe (Base, LS, LT); 1999–2006 GMC Sierra 1500 (Base, HT, Hybrid, SL, SLE, SLT, WT); 2007 GMC Sierra 1500 Classic (Denali, Hybrid); 2000–2002 GMC Yukon (Denali, SLE, SLT); and 2000–2002 GMC Yukon XL 1500 (Denali, SLE, SLT).
The AR8641XPR covers the rear axle of 1500-class trucks, not the 2500 or 3500, and the Tahoe and Yukon entries end at 2002. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The AR8641XPR is a direct-fit replacement, so it goes on the rear hubs of the listed vehicles in place of the original rotors; replace both sides of the axle together.









