Overview
The Power Stop EBR485XPR is a rear slotted and cross-drilled brake rotor for the 2003–2004 Land Rover Discovery, 1999–2002 Land Rover Discovery Series II and 1995–2002 Land Rover Range Rover. The rotor uses a G3000 grade cast, and Power Stop’s drilled and slotted rotors carry a silver zinc plating that helps shield them from rust during normal operation.
The EBR485XPR is a rear slotted and cross-drilled rotor for owners of the 2003–2004 Land Rover Discovery, 1999–2002 Land Rover Discovery Series II and 1995–2002 Land Rover Range Rover who want a slotted face rather than a plain disc.
Slots keep refreshing the pad surface as the wheel turns, which is why slotted rotors are often paired with pads made for them.
Key features
- Slotted and cross-drilled rear rotor
- Direct fit for the listed vehicles
- Coated rotor
- Rounded slots that sweep water, gas and dust from the pad contact patch
- Silver zinc plated to shield against rust during normal operation
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
Slotted rotors and pad choice
Slots and cross-drilled holes serve different jobs. Slots help sweep gas, dust and water from the pad surface, while drilled holes let heat and gas escape from the friction area. Both features suit drivers who brake hard or work their vehicles in rough conditions, although they do not replace good pad selection.
Pads and rotors wear together, so a new slotted rotor is best paired with pads designed for slotted faces. Bed the new pads in with a series of moderate stops, then avoid hard stops until the pad surface has transferred evenly. Inspect the drilled holes for cracking at each brake service, and replace the rotor when wear or cracks appear.
- Replace rotors and pads in matched sets on the same axle
- Clean the hub face before mounting so the rotor sits flat
- Inspect the holes and slots for cracks or heat marks
Specifications
| Brand | Power Stop |
|---|---|
| Part number | EBR485XPR |
| UPC | 70000695789 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2003–2004 Land Rover Discovery (HSE, S, SE), 1999–2002 Land Rover Discovery Series II (LE, SD, SE) and 1995–2002 Land Rover Range Rover (50th Anniversary Edition, Base, Callaway, County, HSE, HSK, Kensington, S, SE, Vitesse).
Measure the rotor you are replacing for diameter, thickness, bolt pattern and weight, and match those dimensions before ordering.
The Discovery covers 2003–2004, the Discovery Series II covers 1999–2002, and later Discovery and Range Rover generations fall outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Use the fastener torque figures in the vehicle’s service manual when mounting the rotor and caliper.
What’s included
The package is a single Power Stop rear brake rotor.
Not included: Brake pads and mounting hardware do not come with the rotor.









