Overview
The Power Stop JBR1124XPR is a front slotted and cross-drilled brake rotor for the 2005–2015 and 2017 Nissan Frontier, 2005–2012 Nissan Pathfinder, 2005–2015 Nissan Xterra and 2009–2012 Suzuki Equator. Because the rotor is both slotted and cross drilled, it combines debris clearing at the pad surface with extra cooling.
It is for owners of the 2005–2015 and 2017 Nissan Frontier, 2005–2012 Nissan Pathfinder, 2005–2015 Nissan Xterra and 2009–2012 Suzuki Equator who want a front rotor with a slotted and cross-drilled face.
Cross-drilled holes give heat and gas somewhere to go, and slots wipe the pad surface as the rotor turns. The two features are often combined on rotors meant for harder-than-usual braking.
Key features
- Slotted and cross-drilled front rotor
- Direct fit for the listed vehicles
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
Bedding in and pad pairing
New brake pads need a short bedding period to transfer an even layer of friction material onto the rotor. Until that happens, pads can grab or squeal. A slotted and cross-drilled rotor shows this transfer pattern clearly, so it is worth reading the surface after the first few stops.
Most drivers of these trucks and SUVs use them for towing, trail work or daily commuting. Heavier loads mean more heat, so choose pads suited to the job. Match pads to the rotor face, keep the rotor and pads on the same axle, and avoid hard stops early in a set’s life.
- Clean the rotor face of oil before the first stops
- Replace pads and rotors as a matched set on one axle
- Check the rotor surface for cracks around the drilled holes
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1124XPR |
| UPC | 792088557841 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Front |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2005–2015 and 2017 Nissan Frontier (Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV); 2005–2012 Nissan Pathfinder (LE, S, SE, SE Off-Road, SV, Silver Edition, XE); 2005–2015 Nissan Xterra (Off-Road, PRO-4X, S, SE, X); and 2009–2012 Suzuki Equator (Base, RMZ-4, Sport).
Before buying, check the old rotor’s diameter, thickness, bolt pattern and weight.
The Frontier fits 2005–2015 and 2017 only, the Pathfinder fits 2005–2012, and the Xterra fits 2005–2015; other years fall outside these ranges. Match your vehicle’s year, model and trim to the covered ranges before buying.
Installation notes
Allow new pads to bed in with moderate stops before any hard braking.
What’s included
The package is a single front brake rotor.
Not included: Pads, calipers, wheel studs and fasteners are separate items and need to be sourced before installation.








