Overview
The Poison Spyder Rocker Knockers with Sliders, bare steel, part number 15-08-060, are body-mounted rocker guards with a tubular DOM slider. Their fitment list is the 2004 to 2006 Jeep Wrangler LJ, including the Unlimited and Unlimited Rubicon. The plate is 3/16 inch steel, and the slider is welded to the guard with additional DOM tube spacers.
The slider keeps the body sides a few inches clear of tall rocks and trees, and it can be used as a pivot when searching for traction. It also doubles as a short entry step, which helps when getting in and out of the Jeep on steep or muddy ground. Mounting hardware and instructions are included, and the guard bolts to the body in key areas. The guard is brake-formed and the bolt holes are countersunk. Rubber rocker liners are sold separately.
Key features
- High strength 3/16 inch plate steel, CNC laser-cut
- High strength DOM structural tubing slider
- Slider welded to the guard with DOM tube spacers
- Slider serves as a pivot point and entry step
- Bolt holes countersunk for the stainless flat-head hardware
- Mounts to the body with no gap when a body lift is installed
Getting the most from a slider
A slider takes the impacts that would otherwise reach the rocker panel, so it works hardest on ledges and off-camber sections. Approach obstacles with the slider in mind, and keep the weight of the Jeep moving rather than stalling on the tube. Sliders also collect mud and gravel in the tube joints, so a quick rinse after muddy runs keeps the spacers and welds in better condition.
Because the slider is part of the guard, damage to one part affects the other. Inspect the tube for dents, flattened sections and cracked welds at the spacers after rough outings. Check the bolts that hold the guard to the body as well, since a loose guard can move under load and wear its mounting holes.
- Rinse mud from tube joints after muddy runs
- Inspect spacer welds for cracks
- Check body bolts after rough trails
- Approach ledges with the slider in mind
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 15-08-060 |
| UPC | 614901726497 |
| Type | Formed plate guard with standoff and slider |
| Finish | Bare steel |
| Material | High strength 3/16 inch plate steel |
| Slider | High strength DOM structural tubing |
| Fasteners | Countersunk stainless steel flat-head |
| Installation | Cutting or drilling required |
Vehicle fitment
These rocker knockers with sliders fit the 2004 to 2006 Jeep Wrangler LJ, Unlimited and Unlimited Rubicon. Confirm your Jeep is an LJ before ordering, since the guard is made for that body.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting or drilling is required to mount the guard to the body. Line up the slider with the guard before the bolts are fully tightened, and check the clearance at the slider ends on the LJ body.
What’s included
The bare steel rocker knocker with its welded DOM slider and the countersunk stainless flat-head hardware.














