Overview
The Poison Spyder Rocker Knockers, bare steel, part number 10-08-010, are body-mounted rocker guards built for the Jeep CJ5. They fit the 1959 to 1983 Jeep CJ5. The guards are cut from high strength 3/16 inch plate steel and brake-formed for a precise fit, and they keep the rocker panel close to the body. Guards for other CJ models are sold under separate part numbers. The bolt holes are countersunk, so the hardware sits flush. Mounting points should be chosen with the body mounts in mind, since the guard interfaces with them.
Vehicle rocker panels take hits from rocks underneath and from the sides when the Jeep works through tight trails. These guards protect the rocker with rugged plate steel while adding very little height to the body line, so the Jeep keeps its clearance over obstacles.
Key features
- High strength 3/16 inch plate steel, CNC laser-cut
- Brake-formed to follow the CJ5 rocker panel lines
- Countersunk bolt holes for flat, unobstructed surfaces
- Bolts to the body in key areas and to strengthened tub sections
- Mounts to the body, so there is no gap with a body lift
- All mounting hardware and detailed instructions included
Rocker panel protection
Rocker panels rust from the inside out when mud and water sit against them, so a guard that sits tight against the body can trap moisture. Before mounting, treat the bare steel and the contact areas with a rust inhibitor, and check the body mounts for corrosion, since the guard relies on them.
Plate steel guards protect the rocker well when they are mounted solidly. Inspect the bolts and body mounts each season, look for paint chips where the armor rubs, and touch up the finish before rust starts. Loose or rubbing armor is usually the first sign the mounting needs attention.
- Prime bare steel before paint
- Check body mounts for rust each season
- Touch up paint where armor contacts the body
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 10-08-010 |
| UPC | 614901723052 |
| Type | Formed plate guard |
| Finish | Bare steel |
| Material | High strength 3/16 inch plate steel |
| Fasteners | Countersunk stainless steel flat-head, included |
| Mounting | Body mounts and strengthening ribs |
| Installation | Cutting or drilling required |
Vehicle fitment
It fits the 1959 to 1983 Jeep CJ5. Confirm your Jeep is a CJ5 and that its year falls in that range before ordering, since guards for other CJ models use different part numbers.
Confirm your vehicle’s year, model and trim before ordering. Rubber rocker liners are sold separately.
Installation notes
Cutting or drilling is required because the guard bolts to the body. The mounting hardware and detailed instructions are included, and the guard interfaces with the strengthened areas of the tub. Rubber rocker liners are available separately to protect the paint.
What’s included
CJ5 rocker knockers with stainless flat-head hardware and installation instructions.









