Overview
The Poison Spyder Ricochet Rockers in bare steel, part number 15-50-050, are formed rocker armor with a 5 inch dimpled step and slider. They are built for the 2004 to 2006 Jeep Wrangler LJ, including the Unlimited and Unlimited Rubicon.
The dimpled step plate reinforces the slider and gives a foothold when entering or leaving the vehicle, and the dimples point upward for grip in snow or mud. The Ricochet Rocker can be used alone or together with Crusher Corners, and the two pieces meet at the rear flare to protect the body from the front wheel well to the tailgate. The slider reinforces the step, and the step adds stiffness to the armor where the two meet. Both are made from DOM tubing or 3/16 inch steel, which keeps the armor rigid.
Key features
- 5 inch dimpled step plate
- Dual tube support and slider bar of 1.5 inch DOM tubing
- Step and corner gussets of CNC laser-cut 3/16 inch steel
- Brake-formed gussets for strength and a clean look
- Professionally welded, ready to paint and bolt on
- Works alone or with Crusher Corners
Working the step and slider
The dimpled step and the slider are the parts of rocker armor that take the most use, since they are where people step onto the Jeep and where rocks and stumps hit first. Keep the step plate clear of mud and debris so the dimples keep their grip, and rinse it after muddy runs.
Slider tubes may be used as a pivot when working around an obstacle, so their welds should be inspected after heavy use. Look for bent tube, cracked gussets or loose hardware, and repair any damage before the next trip. Choosing a slider height that clears common obstacles on your trails helps protect the body.
- Clean dimpled steps to keep grip
- Inspect slider welds after pivoting
- Check countersunk hardware for loosening
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 15-50-050 |
| UPC | 614901726572 |
| Type | Formed plate guard with tubular standoff |
| Finish | Bare steel, ready to paint |
| Step | 5 inch dimpled plate |
| Slider tube | 1.5 inch DOM, dual tube support |
| Gussets | 3/16 inch steel, CNC laser-cut |
| Fasteners | Countersunk 3/8 inch stainless |
| Installation | Cutting or drilling required |
Vehicle fitment
It fits the 2004 to 2006 Jeep Wrangler LJ, Unlimited and Unlimited Rubicon. It does not fit the Wrangler TJ, YJ, CJ7 or CJ8, so confirm your Jeep is an LJ before ordering.
Confirm your vehicle’s year, model and trim before ordering. Rubber liners are sold separately.
Installation notes
Expect to cut or drill the body, then secure the rockers with countersunk 3/8 inch stainless hardware. Detailed installation instructions are included with the kit. A precision cut rubber liner is available separately to protect the paint underneath.
What’s included
The Ricochet Rocker assembly and its countersunk 3/8 inch stainless hardware. Rubber liners are not part of the kit.
















