Overview
The Poison Spyder Rocker Knockers, bare steel, part number 13-08-040, are body-mounted rocker guards for YJ models that use TJ fender flares. They fit the 1987 to 1995 Jeep Wrangler YJ. The guards are cut from high strength 3/16 inch plate steel and brake-formed to hug the rocker panel with little loss of ground clearance.
Rocker panels take a lot of abuse on the trail, from rocks underneath and from the sides as the Jeep works through tight obstacles. The guard clads the rocker panel in plate steel and keeps the body line close, so the factory sheet metal is less exposed when the Jeep slides or scrapes. The guard is engineered for the YJ body, and the stainless steel flat-head hardware is included so the bolt heads sit flush. The guard is formed to the rocker panel, so the mount points follow the body contours.
Key features
- High strength 3/16 inch plate steel, CNC laser-cut
- Brake-formed to hug the rocker panel lines
- Countersunk bolt holes for the stainless steel flat-head hardware
- Flat, unobstructed surface for sliding over obstacles
- Bolts to the body and strengthened tub areas
- Mounts to the body, so there is no gap with a body lift
Working with a body lift
On a YJ, the rocker panel is the lowest part of the body that still shows factory sheet metal, so it takes most of the contact when the Jeep crawls over ledges. A guard that bolts to the body spreads impact loads into the tub rather than into the frame. That makes the condition of the mounting area important. Check the tub where the guard attaches, since rust or cracked seams there will carry the load instead of the steel.
If the flares come from a different model, look closely at how they sit over the guard. Gaps at the front and rear ends are common and can trap mud. Many owners also pair rocker guards with rubber liners, which protects paint and keeps the body line tidy.
- Inspect tub seams before mounting
- Check flare edges for clearance over the guard
- Recheck bolts after rough trail runs
- Clear mud from the gap behind the guard regularly
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-08-040 |
| UPC | 614901724301 |
| Type | Formed plate guard |
| Finish | Bare steel |
| Material | High strength 3/16 inch plate steel |
| Fasteners | Countersunk stainless steel flat-head, included |
| Mounting | Body mounts and strengthening ribs |
| Installation | Cutting or drilling required |
Vehicle fitment
These guards fit the 1987 to 1995 Jeep Wrangler YJ. They are made for YJ models using TJ fender flares, so confirm the flares on your YJ match before ordering, and check the model and year against your vehicle.
Confirm your vehicle’s year, model and trim before ordering. Rubber rocker liners are sold separately.
Installation notes
Cutting or drilling is required, and the mounting hardware and instructions are included. Because the guard mounts to the body, plan the bolt pattern before starting. Rubber liners are sold separately to protect the paint underneath.
What’s included
YJ rocker knockers, countersunk stainless flat-head hardware and mounting instructions.









