Overview
The Poison Spyder Brawler Rockers in bare aluminum, part number 17-08-200-ALUM, are two-piece mini-boatside rocker armor for the Jeep JK. They fit the 2007 to 2016 Jeep Wrangler JK. The construction matches the steel Brawler Rockers, except that these pieces are cut from 3/16 inch aluminum plate, which is lighter. The pieces use the same CNC laser cutting and brake-forming process as the steel version. Fasteners are stainless steel flat-head cap screws, and the lower piece uses clip-nuts.
Aluminum gives up some protection compared with steel, and it should not be expected to take the same punishment on rocky trails. It suits builders who want the boatside profile and entry step along with a weight saving. Steel is the better choice for trails with frequent rock contact.
Key features
- Two-piece mini-boatside design
- 3/16 inch aluminum plate
- Rub rail that protrudes about 3-1/4 inches outboard of the body tub
- Top of the rub rail can serve as an entry step
- Oval lightening holes along the boatside section
- Angled facets that allow up to a 40 inch tire
Aluminum finishing and care
Bare aluminum arrives ready for paint or powder coat, which gives the builder control over color and surface finish. Clean the metal thoroughly before coating, and use a primer made for aluminum so the finish bonds well. Because the pieces are unfinished, the coating is also the first line of defense against scuffs and light abrasion, so it is worth checking after each trail season.
Aluminum dents more easily than steel but can often be pushed back by hand or with a block and mallet. Keep fasteners of stainless steel or a compatible material to limit corrosion where metals meet. Check the mounting holes after any impact, since stretched holes or cracked edges call for replacement before the piece goes back on the Jeep.
- Clean and prime before painting or coating
- Use fasteners suited to aluminum
- Check coating after each trail season
- Inspect mounting holes after impacts
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-08-200-ALUM |
| UPC | 614901726794 |
| Type | Formed plate guard |
| Finish | Bare aluminum |
| Material | 3/16 inch aluminum plate |
| Pieces | Two (upper and lower) |
| Maximum tire | 40 inch |
| Body lift compatibility | Not compatible |
| Installation | Cutting or drilling required |
Vehicle fitment
These pieces fit the 2007 to 2016 Jeep Wrangler JK. They are designed for 2-door models, so confirm your Jeep’s body style and year before ordering, and check that it has no body lift.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The upper piece attaches to the body tube with stainless flat-head cap screws and nut-serts, and the lower piece attaches to the upper with flat-head screws and clip-nuts. The armor ships bare, so it can be painted or powder coated in the color you choose. If Body Armor was previously installed, the existing nut-serts can be reused.
What’s included
Two bare aluminum Brawler Rocker pieces, shipped unfinished.
















