Overview
The Poison Spyder Brawler Rockers in black powder coat, part number 17-08-200P1, are two-piece mini-boatside rocker armor for the Jeep JK, made for 2007 to 2016 Wrangler JK models. Each piece is cut and brake-formed from 3/16 inch plate steel and finished in black powder coat. The upper piece hugs the lower section of the body, and the lower piece carries a rub rail and entry step.
The Brawler Rocker is built for rocker protection that also helps the Jeep move. The boatside shape slides off obstacles, the protruding rub rail keeps trees and rock walls clear of the doors, and the top of the rub rail can be used to lift the Jeep with a Hi-Lift jack.
Key features
- Black powder coat finish, ready to install
- Two-piece mini-boatside design in 3/16 inch plate steel
- Internal gussets of 3/16 inch steel for strength
- Oval lightening holes along the boatside allow mud and debris to be hosed out
- Ends capped in angled facets that allow up to a 40 inch tire
- All fastener holes countersunk for a flat surface
Lifting and body clearance
Rocker armor on a Jeep does more than protect the body. The lower edge sets how the vehicle meets obstacles, and a boatside shape helps the rocker slide over ledges instead of catching. Tire size and body lift both change how the armor sits, so check tire clearance at the rocker ends before a long trip and confirm the armor still clears the tire at full steering lock.
Lifting and recovery need a plan. A Hi-Lift jack should be seated on a solid part of the armor, with the base on firm ground and a helper watching the lift. Inspect the upper and lower pieces after recovery, since a hard load can bend thin plate or loosen fasteners. Recheck the bolts after each trail day until you know how the armor settles.
- Check tire clearance at the rocker ends
- Seat the jack base on firm ground
- Inspect both pieces after any hard lift
- Recheck fasteners after the first few trail days
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-08-200P1 |
| UPC | 614901751635 |
| Type | Formed plate guard |
| Finish | Black powder coat |
| Material | 3/16 inch plate steel |
| Pieces | Two (upper and lower) |
| Maximum tire | 40 inch |
| Body lift compatibility | Not compatible |
| Installation | Cutting or drilling required |
Vehicle fitment
This part is made for the 2007 to 2016 Jeep Wrangler JK. It is written for 2-door models, so confirm your Jeep’s year and body style before ordering. Confirm your Jeep has no body lift, since the Brawler Rockers do not work with one.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The upper piece attaches to the body tube with stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece with flat-head screws and easy-to-install clip-nuts, and it connects at the Jeep’s body mounts for triangulated strength. Every fastener hole is countersunk, so the armor sits flush, and stainless steel fasteners are used throughout.
What’s included
The two black powder coated Brawler Rocker pieces, with the fasteners the kit uses.




















