Overview
The Poison Spyder Rocker Knockers with Sliders, bare steel, part number 10-08-020, are body-mounted rocker guards with a tubular slider for the Jeep CJ5, fitting 1959 to 1983 models. The armor is high strength 3/16 inch plate steel, and the slider is DOM structural tubing welded to the guard.
The slider keeps the side of the vehicle a few inches clear of tall rocks and trees, and it can be used as a pivot when working the Jeep around an obstacle for traction. It also serves as a short entry step for getting in and out of the CJ5.
The slider attaches with the same spacers that hold it to the guard, so the two parts stay aligned. The slider is part of the guard, so there is no separate slider to order.
Key features
- High strength 3/16 inch plate steel, CNC laser-cut
- Tubular DOM slider welded to the rocker knocker with spacers
- Slider doubles as a pivot and entry step
- Countersunk bolt holes for flat, unobstructed surfaces
- Bolts to the body in key areas
- Mounts to the body, with no gap when a body lift is installed
Slider care and fit
A tubular slider takes steady abuse from rocks and roots, and its welds are where cracks usually start. After a rough trip, look at each weld for hairline cracks and check that the slider has not shifted on its spacers. Spacer bolts can loosen as the Jeep flexes, so retighten them and inspect them more often than the body hardware.
Because the slider doubles as a step, its surface can pick up mud and grease. Wipe it down so boots grip better, and keep the top edge free of sharp damage. A slider that sits clear of the body line protects the sides of the Jeep without adding unnecessary height to the armor.
- Inspect slider welds for hairline cracks
- Retighten spacer bolts after flexing trails
- Keep the step surface clean for grip
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 10-08-020 |
| UPC | 614901723076 |
| Type | Formed plate guard with tubular standoff and slider |
| Finish | Bare steel |
| Material | High strength 3/16 inch plate steel |
| Slider | High strength DOM structural tubing |
| Fasteners | Countersunk stainless steel flat-head, included |
| Installation | Cutting or drilling required |
Vehicle fitment
They fit the 1959 to 1983 Jeep CJ5. Confirm your Jeep is a CJ5 and that its year is within that range. A CJ7 or CJ8 needs a different guard, so check the model before ordering.
Confirm your vehicle’s year, model and trim before ordering. Rubber rocker liners are sold separately.
Installation notes
Cutting or drilling is required to mount the guard to the body. The mounting hardware and detailed instructions are included, and the slider should be lined up with the guard before the bolts are fully tightened.
What’s included
The CJ5 rocker knocker with its sliders attached, plus countersunk hardware and instructions.












