Overview
The Poison Spyder 17-03-031-ALUM is a narrow-width front crusher flare kit in bare aluminum for the 2007–2018 Jeep Wrangler JK, including 2-door and 4-door models. Poison Spyder Customs makes these flares 2 inches narrower than its standard-width crusher flares, which adds 2 inches of clearance from canyon walls, trees and other obstacles on tight trails.
Front fenders and flares are among the most vulnerable body parts on a Jeep when it runs the trail, and crusher flares are built to protect them. Poison Spyder says these aluminum flares are light at about 10 lbs per fender while staying durable. They are intended for the JK front fenders and flares, and because they ship bare, the finish has to be applied before the flares go on. Poison Spyder does not offer a powder coat option for this item, so the coating is a separate job.
Key features
- Narrow width, 2 inches narrower than standard crusher flares
- 2 inches of extra clearance from walls, trees and obstacles on tight trails
- Aluminum construction, about 10 lbs per fender
- Bare aluminum finish that must be painted or powder coated before installation
- Built with 1.5 x .120 wall DOM tubing and a 1/8 inch steel plate
- Weld-on flare construction
- Designed for 2-door and 4-door JK models
Choosing flares for trail use
Crusher flares protect the fender edges and the sheet metal behind the tire when the Jeep brushes rocks, trees and tight ruts. Their main job is to take impacts so the fender itself is not bent or torn, and their width determines how close the trail can get to the tire.
Before buying, consider how you will use the Jeep. Narrower flares give more room against obstacles but leave less coverage over the tire, so tire size, fender lip and suspension travel all matter. Plan the finish and mounting work before the flares arrive so the project stays on schedule.
- Check tire size against fender coverage
- Plan paint or powder coat before mounting
- Inspect welds and mounting points after trail use
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-03-031-ALUM |
| UPC | 614901742473 |
| Vehicle | 2007–2018 Jeep Wrangler JK, 2-door and 4-door |
| Position | Front, narrow width |
| Width reduction | 2 inches narrower than standard width |
| Extra clearance | 2 inches |
| Material | Bare aluminum |
| Tubing | 1.5 x .120 wall DOM |
| Steel plate | 1/8 inch |
| Weight | About 10 lbs per fender |
Vehicle fitment
These flares fit the Jeep Wrangler JK, covering 2007 through 2018 models with 2-door and 4-door bodies. They are designed as a direct fit for the JK front fenders.
The JK chassis does not cover the earlier TJ or LJ Wrangler or the later JL generation that begins in 2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Paint or powder coat the bare aluminum before mounting the flares. The flares install as a direct fit with no cutting or drilling, and they are also built for weld-on mounting, so confirm the mounting method for your fenders before ordering. Weld near the fuel tank, brake lines and wiring only after those parts are removed or fully protected.
What’s included
This is a front crusher flare kit. Check the package contents against your installation before starting. Paint, powder coating and welding supplies are not included.
















