Overview
The Poison Spyder 17-05-020-ALUM is an extra wide aluminum rear crusher flare for the Jeep Wrangler JK in two-door and four-door models. It is 2 inches wider than the standard width rear flare. The extra width adds 2 inches of tire coverage, which can help meet local tire coverage laws and keep more dirt and mud from being thrown onto the side of the Jeep by wider wheels and tires.
The flare replaces the stock plastic rear flares. The JK’s thin sheet metal fenders and stock plastic flares are among the most vulnerable body components on the trail. The aluminum version is lighter than steel and sturdier than the factory plastic, and it follows the same design approach as the steel crusher flares.
The flare is built on a CNC laser cut 3/16-inch aluminum mounting plate with a 1/8-inch aluminum top plate. The outer rub rail is CNC bent aluminum tubing. An internal bracing kit transfers impact loads from the flare to the Jeep’s heavy gauge inner tub structure, so the thinner outer sheet metal does not absorb the force alone.
Aluminum is lighter than steel, which may suit owners who want to save weight. It cannot take direct impacts as well as steel, so drivers should take more care on the trail. Installation requires cutting or drilling.
Key features
- Extra wide rear flare, 2 inches wider than standard width
- Light-weight aluminum construction
- CNC laser cut 3/16-inch aluminum mounting plate
- 1/8-inch aluminum top plate
- Internal bracing kit that carries impacts into the inner tub
- Designed for extra tire coverage and mud control
Rear flare fitment and tire coverage
A wider rear flare changes how the rear tire sits in the body opening. Check tire clearance with the suspension at full compression and, where steering is involved, at full lock. The extra width helps keep mud and water off the side of the Jeep, but the flare still needs room for the tire and the rear bumper.
Because the outer sheet metal is thin, the internal bracing does most of the work. Keep the bracing hardware tight and check the mounting plate for cracks after trail impacts. Rear body mounts and the tailgate hinge can shift with a flare change, so check tailgate and taillight alignment after installation.
- Check tire clearance at full compression
- Inspect the mounting plate after impacts
- Confirm taillight and tailgate alignment
- Keep bracing hardware tight and checked
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-05-020-ALUM |
| UPC | 614901751086 |
| Location | Rear |
| Type | Tube fender |
| Width | Extra wide, 2 inches wider than standard width |
| Material | Aluminum |
| Mounting plate | 3/16-inch aluminum |
| Top plate | 1/8-inch aluminum |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
These extra wide aluminum rear flares are made for the Jeep Wrangler JK, which covers the 2007–2018 model years in two-door and four-door bodies.
Check the year, model and trim of your Jeep before placing an order. These flares are made for the Wrangler JK and are not designed for the TJ, LJ or JL.
Installation notes
Install the internal bracing kit with the flare so that impact loads reach the inner tub. Cutting or drilling is needed before the flare can be fitted.
What’s included
The extra wide aluminum rear crusher flare with its mounting plate, top plate and internal bracing kit.
Not included: the cutting or drilling tools needed for installation.





















