Overview
The Poison Spyder 11-02-073 is a set of DeFender front flares with a solid inner fender kit, made for the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler. DeFenders are fabricated entirely from CNC laser cut, precision brake-formed 3/16-inch heavy duty P&O steel plate. The flares are built to protect the front body of the Jeep.
Each DeFender has an extra return, or lip, along the underside. The return helps keep the fender from cutting into a fully stuffed tire and adds strength along the outer edge, where rocks, canyon walls and trees are most likely to contact the Jeep.
For owners who need to keep tire coverage, the DeFenders with 3-inch flares give about the same tire coverage as the stock CJ plastic flares. The wheel opening is much larger than stock or many competing tube fenders. The back of the opening, where larger tires rub at full steering lock, sits about 2-1/2 inches further back than typical tube fenders and about 4 inches further back than the stock Jeep flares.
The kit includes a solid inner fender set. Inner fenders protect the engine compartment from splash and carry the under-hood mounts. The DeFenders are shipped unpainted and ready to install on the Jeep once the owner has chosen a finish.
Key features
- Fabricated from 3/16-inch heavy duty P&O steel plate
- 3-inch tapered flare with splash protection
- Underside return for edge strength and tire protection
- Larger wheel opening than stock or typical tube fenders
- Solid inner fender kit included
- Tapers at the front for better clearance on tight trails
Tire clearance and steering
Flares and fenders set how much tire can be fitted before the sheet metal and the inner structure start to rub. Turning the wheels to full lock with the tires mounted is the simplest check after installation. Watch for contact at the inner edge of the fender and at the tie rod, since the flare changes the space around the wheel opening.
Steel tube fenders are heavier than the stock sheet metal, so the front end may feel different on the road. Check the fender bolts and inner fender fasteners after a few drives, especially after off-road trips. Because the kit includes solid inner fenders, any under-hood wiring or hoses may need re-routing before the engine bay is closed up.
- Test steering lock with the tires you plan to run
- Re-check fender bolts after the first trails
- Route wiring and hoses clear of the new inner fenders
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 11-02-073 |
| UPC | 614901764376 |
| Type | DeFender flare |
| Material | 3/16-inch heavy duty P&O steel plate |
| Flare | 3-inch tapered |
| Wheel opening | About 2-1/2 inches further back than typical tube fenders |
| Inner fender | Solid inner fender kit included |
| Finish | Bare steel, shipped unpainted |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Poison Spyder lists these DeFender front flares as a direct fit for the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade) and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL and SR).
The list does not include the Wrangler YJ, TJ or JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. The solid inner fenders are part of the kit, so the factory inner fenders can be replaced rather than reused.
What’s included
The DeFender front flares and the solid inner fender kit.
Not included: paint or powder coating, and any under-hood accessory mounts.




















