Overview
The Poison Spyder 11-04-040 is a set of comp cut crusher corners in bare steel for the 1976–1986 Jeep CJ7, in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims. Comp cut corners have a competition-style wheel opening that allows clearance for large tires and for articulation.
The wheel well is open toward the rear, which allows for wheelbase stretches and gives maximum clearance on hard trails. The corners have provisions for flush-mounted LED taillights, which are sold separately. The comp cut shape is designed to save weight compared with standard crusher corners.
The corners are laser cut from high strength 3/16-inch plate steel and roll-formed to fit the Jeep’s body lines. The bolt holes are countersunk, and the supplied stainless steel flat head cap screws leave a smooth, flat surface to slide over rocks.
Key features
- Competition-style wheel opening for large tire clearance
- Open toward the rear for wheelbase stretches
- Provisions for flush-mounted LED taillights
- Laser cut from 3/16-inch plate steel
- Countersunk bolt holes with stainless steel flat head cap screws
- Roll-formed to fit the body lines
Taillight and filler fitting
Comp cut corners open the rear of the wheel well, so the taillight, filler and any rear body mounts are more exposed than on a standard corner. Plan the taillight location before drilling, and test-fit the LED lights against the corner so the wiring reaches them without strain. A flush-mount light sits tight against the metal, so clearance should be checked at each step.
Competition-style openings are often used with other trail parts, such as heavier bumpers or rear tire carriers. Those parts change the load on the corner mounts, so the bolts should be checked after first trips. An open rear edge also takes more direct contact from rocks, so inspect the edges for dents and cracks.
- Test-fit the taillights before drilling
- Check wiring clearance after mounting
- Re-check bolts after the first rough trips
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 11-04-040 |
| UPC | 614901723281 |
| Corner type | Full |
| Material | Steel, 3/16-inch plate |
| Hardware | Stainless steel flat head cap screws |
| Finish | Bare steel |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Poison Spyder lists these comp cut crusher corners as a direct fit for the 1976–1986 Jeep CJ7, including the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade models.
The list does not include the CJ5, the Scrambler or the Wrangler models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. Paint or powder coat the bare steel before final installation. Check the taillight and filler location before drilling, since the corners have provisions for flush-mounted taillights.
What’s included
The bare steel comp cut crusher corners with the supplied stainless steel flat head cap screws.
Not included: the flush-mounted LED taillights and paint or powder coating.












