Overview
The Poison Spyder Brawler Lite front bumper with Trail Stinger and tube gussets, part number 17-59-010-ST, is a bare steel bumper for the 2007–2016 Jeep Wrangler JK. It is a mid-width, high clearance bumper with an integrated winch mount and no D-ring mounts.
The Trail Stinger is modeled after the one Poison Spyder popularized and is made of CNC laser-notched, NC-bent 1-3/4″ diameter .120 wall DOM tubing, fortified by a pair of 1-1/4″ diameter .120 wall DOM tube gussets.
The Trail Stinger style gives clean lines along with some protection against forward flop. A complex laser-cut notch lets the stinger weld to two planes on the bumper surface.
The faceted design of the Brawler Lite provides maximum ground clearance and approach angle possible without frame modifications. The factory crash bar may be left in place or removed.
The Trail Stinger on this bumper is made of CNC laser-notched, NC-bent DOM tubing and is fortified by a pair of tube gussets, with recessed fog lamp buckets and an integrated winch mount below it.
Key features
- Trail Stinger of 1-3/4″ diameter .120 wall DOM tubing
- Pair of 1-1/4″ diameter .120 wall DOM tube gussets
- Integrated winch mount
- Recessed buckets for factory fog lamps
- No D-ring mounts
- Bare 3/16″ plate steel
Tube bumper trade-offs
Tubular stingers trade some protection for clearance. Tube stock deflects a rock or log instead of holding it like a solid plate, which keeps the approach open but leaves the edges more exposed to bending on a hard hit. Inspect the stinger after rough sessions for dents, pinched welds or a shift in the gusset joints.
Gussets and the winch area decide how the stinger holds up. A tube stinger carries most of its load through the gussets and the welds to the bumper shell, so loose or cracked welds are the first sign of trouble. Weld repairs are best left to a shop that can match the tubing wall.
If recovery gear is added later, mount points should be placed so the pull runs into the bumper and frame rather than into a single tube. Keep a set of spare bolts and a torque wrench in the toolbox for trail checks.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-59-010-ST |
| UPC | 614901727241 |
| Product type | Front bumper with Trail Stinger and tube gussets |
| Position | Front |
| Material | Steel, 3/16 inch plate |
| Finish | Bare |
| Width | Mid-width |
| Trail Stinger tubing | 1-3/4 inch diameter, .120 wall DOM |
| Gusset tubing | 1-1/4 inch diameter, .120 wall DOM, pair |
| D-ring mounts | None |
| Winch mount | Integrated |
| Body styles | 2-door and 4-door |
Vehicle fitment
It is for the 2007–2016 Jeep Wrangler (JK), in 2-door and 4-door versions.
JL, TJ and LJ Wranglers fall outside this fitment. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Warn PowerPlant winches need minor modifications by the installer to clear the DOM tube gussets. The bumper mounts without altering the frame rails.
What’s included
- Brawler Lite front bumper with integrated winch mount
- Trail Stinger
- Pair of tube gussets
Not included: D-ring mounts, winch and the Brawler Lite Skid Plate.














