Overview
The Poison Spyder BFH front bumper with shackle tabs, part number 11-16-020-D, is a bare steel front bumper made from a single piece of 3/16″ plate steel. BFH stands for Built For the Hammers, and the design aims for the ground clearance, tire clearance and approach angle that Poison Spyder says are possible.
The bumper is no wider than a Jeep’s frame rails, with angled facets to help it slide over rocks, and it has an integrated winch mount.
The BFH is built with maximum ground clearance, tire clearance and approach angle possible, which is why the bumper follows the frame rails instead of spreading wider. The Recovery Shackle Tabs are machined from 1 inch thick plate steel to give a secure attachment point for 3/4 inch recovery shackles, and they are angled to match the bumper so there is no loss in approach angle.
Because the finish is bare steel, the part arrives without paint or powder coat.
Key features
- CNC laser-cut from one piece of high strength 3/16″ plate steel, then brake-formed
- Integrated winch mount
- Recovery shackle tabs machined from 1″ thick plate steel for 3/4″ shackles
- Tabs angled to avoid losing approach angle
- No wider than the frame rails
- Bare steel finish
Recovery and frame protection
A front bumper is often the first part to meet obstacles, so mounting strength and clearance both matter. A bare steel bumper gives a solid base for recovery points, but it needs protection from moisture and road debris. Inspect the welds and mounting brackets after rough trails, and touch up any exposed steel promptly to slow rust.
Shackle tabs are designed for recovery, so use only shackles and straps rated for the load and keep the pull angle straight where possible. Side pulls put extra stress on the tabs and mounting points. A winch mount should be used with the winch and cable it is sized for, and the winch line should be routed to avoid rubbing the bumper edges.
- Use shackles that fit the 3/4 inch tab size
- Keep recovery pulls as straight as possible
- Check the bolts after the first few trail runs
- Touch up bare steel soon after installation
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 11-16-020-D |
| UPC | 614901723540 |
| Product type | Front bumper with shackle tabs |
| Position | Front |
| Material | Steel, 3/16 inch plate |
| Finish | Bare |
| Width | Stubby, no wider than the frame rails |
| Winch mount | Integrated |
| Shackle tabs | 1 inch thick plate steel, for 3/4 inch recovery shackles |
Vehicle fitment
Confirm fit against your vehicle’s year, model and trim before ordering. The bumper is sized to follow Jeep frame rails.
Poison Spyder’s description mentions Jeep frame rails but names no model or years, so no specific fitment is stated here. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- BFH front bumper
- Recovery shackle tabs
Not included: Winch, shackles and any coating.












