Overview
The Omix-ADA OAI16737.03 is a preformed steel brake line kit for the front and rear positions, fitting the 1950–1952 Jeep Willys CJ-3 chassis.
Preformed lines are bent ahead of time to a set shape, which helps match original routing. It is a direct fit replacement built to original Jeep specifications.
Key features
- Preformed steel construction
- Covers front and rear brake line positions
- Direct fit replacement for the CJ-3 chassis
- Omix-ADA part number OAI16737.03
Brake line replacement basics
Brake lines carry pressure from the master cylinder to each wheel, so a single weak section can affect the whole system. Steel lines resist corrosion better than rubber but can crack at tight bends and flare joints. Road salt, heat from the exhaust and rubbing against the frame are common causes of damage on older vehicles.
Before fitting a preformed set, lay the new lines beside the old ones and compare bends, flare fittings and clip positions. Minor adjustments to clear frame points are normal. Once connected, bleed the brakes thoroughly and inspect every joint for weeping fluid, then road test carefully in a safe area.
- Compare each bend with the old line
- Use proper flare fittings only
- Bleed all wheels after connecting
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI16737.03 |
| Type | Steel brake line kit, preformed |
| Position | Front and rear |
| Material | Steel |
| Fitment type | Direct fit |
Vehicle fitment
It is designed for the 1950–1952 Jeep Willys CJ-3 chassis.
Check the routing against your chassis before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake line work means the system must be bled of air after the lines are connected. Steel lines can kink and crack when bent, so have a qualified technician fit and bend them carefully, then check every joint for leaks before driving.
What’s included
The kit is a preformed steel brake line set for the front and rear positions.
Not included: Check whether brake fluid, bleeding tools and fittings are needed for your job before starting.









