Overview
The Omix-Ada OAI17430.03 is a piston ring set for 134 4-cylinder engines, supplied in .030 oversize. It is a replacement ring set for Jeep CJ, DJ and FC models and Willys vehicles built between 1941 and 1971, made to original specifications.
Oversize ring sets are matched to a bore that has been machined larger than standard, so measure the cylinder before fitting the rings. No ring width or bore dimensions are given, so compare those against your engine specifications.
Key features
- Piston ring set for 134 4-cylinder engines
- .030 oversize
- Made to original specifications
- Covered by a limited 5-year manufacturer warranty
Ring gap and bore checks
Piston rings seal combustion pressure and control oil on the cylinder wall, so their fit determines how well a rebuilt engine holds compression. The end gap is the space between the two ends of a ring when it sits in the bore, and it changes as the ring wears or as the bore is opened up. Checking gap with a feeler gauge before assembly prevents rings from binding or sealing poorly once the engine warms.
Oversize rings are only useful when the cylinder has been bored to match, so take measurements in several spots and at the top and bottom of the bore. Keep the rings in the order they were removed and label the pistons if they are reused. Lubricate the rings lightly before fitting them to the pistons.
- Measure bore at several depths
- Check end gap with a feeler gauge
- Keep rings in order for each cylinder
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI17430.03 |
| Engine | 134 4-cylinder |
| Size | .030 oversize |
| Included | Piston ring set |
| Warranty | Limited 5-year manufacturer warranty |
Vehicle fitment
It fits Jeep and Willys vehicles from 1941 to 1971, including CJ3, CJ5, CJ6, DJ3, DJ5, DJ6, FC150, FC170, Jeepster, Utility, M38 and MB models, with model years covered for each entry.
Vehicles outside that list, such as Wrangler and Cherokee models built after 1971, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the bore before fitting a .030 oversize ring set and check the ring end gap in the cylinder before the pistons go in. Treat ring work as part of a full engine rebuild and keep the work area clean.
What’s included
One piston ring set, in .030 oversize.
Not included: pistons, bearings and gaskets for the rebuild.









