Overview
The Crown Automotive J0916047 is a rear leaf spring assembly with a 9-leaf pack. It fits the 1959–1975 Jeep CJ5, the 1966–1968 Jeep CJ5A and the 1955–1958 Jeep Willys CJ-5, and it is a single spring at stock height.
Bushings may already be pressed into the spring ends, but they may also need to be sourced separately. Look at the spring ends before planning the installation, since the answer decides what you need to buy.
Key features
- Rear position
- Nine-leaf pack
- Single spring per vehicle
- Stock-height direct replacement range
Rear spring basics for CJ owners
On a CJ, the rear leaf spring carries the axle and sets the rear height, while the spring eyes and shackles keep the axle located. Over the years the leaves can lose arch and the eyes can wear, which lowers the rear and can make the axle wander under braking. Check the ends of the spring closely, since a worn eye is often the first sign the spring needs attention.
The number of leaves changes how stiff the spring feels, so compare the new spring with the old one before removal. Off-road use puts repeated load on the spring, while mostly road use puts less strain on it. Keep the spring ends clean before fitting, and make sure the bushing seats are free of rust.
- Look for sag and uneven rear height
- Check spring eyes for cracks and wear
- Inspect shackles and their pivots
- Keep the spring ends clean before fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0916047 |
| UPC | 848399054552 |
| Position | Rear |
| Leaf count | 9 |
| Spring quantity | Single spring |
| Lift height range | Stock height, direct replacement |
| Bushings | Stated both as pressed into spring ends and as not included |
Vehicle fitment
The manufacturer list covers the 1959–1975 Jeep CJ5 (Base and Renegade), the 1966–1968 Jeep CJ5A (Base) and the 1955–1958 Jeep Willys CJ-5. CJ6, CJ7 and Wrangler models are not on that list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Look at the spring ends before removal to see whether bushings are already pressed in, then plan the installation around what you find. Support the rear axle with stands while the spring hardware is loosened.
What’s included
One rear leaf spring assembly.
Not included: Bushings, which may need to be sourced separately.








