Select your vehicle

Omix-ADA Long Tie Rod – 18058.07

Omix-Ada

Shop Jeep Cherokee XJ Tie Rod Ends on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Omix-Ada long tie rod, part number 18058.07, passenger side
  • Runs from steering knuckle to adjusting sleeve
  • Fits 1991-2001 Jeep Cherokee XJ
  • Direct OE replacement built to original Jeep specifications

Description

Overview

The Omix-Ada 18058.07 is a long tie rod for the passenger side of the Jeep Cherokee XJ. It runs from the steering knuckle to the adjusting sleeve. It is a direct OE replacement built to original Jeep specifications, aimed at XJ owners replacing a worn front tie rod on the passenger side.

Key features

  • Passenger side long tie rod
  • Runs from steering knuckle to adjusting sleeve
  • Listed in the front right outer position
  • Direct OE replacement built to original Jeep specifications

Passenger side long tie rod care

A long tie rod on the passenger side carries steering force between the knuckle and the adjusting sleeve, so it works every time the wheel turns. Wear at its joints shows up as wander, looseness and uneven tire wear on that side. Because the sleeve sets the toe, any change to its length affects how the front end tracks and how the tires wear.

When fitting a long tie rod, match the passenger side fitting to the knuckle, tighten the clamp evenly and check that the threads are fully engaged. Keep the boots on the joints clean and free of grit, since the XJ front end gets exposed to water and gravel. After installation, have the alignment checked and recheck the clamp and nut after the first few drives.

  • Clean and inspect the adjusting sleeve threads
  • Check both joints for play
  • Confirm the tie rod sits square to the knuckle

Specifications

Brand Omix-Ada
Part number 18058.07
UPC 804314051327
Type Long tie rod
Side Passenger
Position Front right outer
Connection Steering knuckle to adjusting sleeve

Vehicle fitment

It fits the 1991-2001 Jeep Cherokee (XJ) in Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.

It fits the Cherokee XJ only, so verify the year and trim before buying.

Installation notes

Expect to have the front end aligned after fitting this tie rod, since the adjusting sleeve controls toe. Check that the passenger side fitting matches the knuckle before tightening.

What’s included

One long tie rod for the passenger side.

SKU: OAI18058.07 Category:

Specification

Shipping weight 9.00 lbs
Package dimensions 42.00 × 5.00 × 5.00 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1991–2001Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Omix-Ada 18058.07 fit a 1995 Jeep Cherokee XJ?

Yes. The 1991–2001 Jeep Cherokee XJ years include 1995, and the listed trims are Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport. Check your trim against that list before ordering.

Which side is the 18058.07 for?

It is a passenger side part. The position is front right outer, and it runs from the steering knuckle to the adjusting sleeve, so it is not a driver side tie rod.

Does this long tie rod fit a Wrangler?

No. It fits the Jeep Cherokee XJ only, so Wrangler owners should look for a tie rod with Wrangler fitment before ordering.

How can I tell if a long tie rod is worn?

Look for play at the joints with the front wheel raised, check the boots for cracks, and watch for wandering or uneven inside tire wear. A knock when the steering turns at low speed can also point to a worn end that needs inspection.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Cherokee XJ Tie Rod Ends on Amazon