Overview
The Moog right-hand outer tie rod end DS1457 is a steering part sold individually. The outer tie rod end connects the steering link to the right knuckle and lets the wheel pivot as the steering turns. It fits 1998 to 1999 Dodge Ram 1500 and Ram 2500 base models.
MOOG says its Problem Solver line incorporates design features for like new steering, simpler installation and longer life. The company describes its powdered metal gusher bearing as routing grease through the bearing to the stud, a patented cover plate that allows tighter tolerances, and a full ball metal stud that rotates through 360 degrees. Patent pending Sunoloy coated metal bearings are also described.
Key features
- Right-hand outer position
- Gusher bearing design that routes grease through the bearing to the stud.
- Patented cover plate that allows tighter tolerances.
- Full ball metal stud that rotates through 360 degrees.
- Sold individually
Steering play and alignment
Play in a steering linkage often shows up first as a slow return to center, a vague feel on the highway, or the truck drifting in one direction. These symptoms point to worn joints, and an outer tie rod end is one of the joints that can cause them. Stiff or cracked boots let dirt in and speed up wear, so inspect the boot whenever the front end is serviced.
After any tie rod work, the front alignment should be set again, and a steering wheel that sits off center should be corrected during that visit. Ask the installer to check the other linkage points for wear while the vehicle is raised. Driving on a flat road soon after the alignment is a good way to confirm the steering centers and the truck tracks straight.
Specifications
| Brand | Moog |
|---|---|
| Part number | DS1457 |
| UPC | 80066317038 |
| Product type | Outer tie rod end |
| Position | Right-hand outer |
| Listed applications | 1998 to 1999 Dodge Ram 1500; 1998 to 1999 Dodge Ram 2500 base |
| Sold as | Individually |
Vehicle fitment
It fits the 1998 to 1999 Dodge Ram 1500 and the 1998 to 1999 Ram 2500 base model. Trim names for the 1500 do not determine fit. Confirm your year, model and the right-hand outer position before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing an outer tie rod end changes toe, so the front alignment should be checked afterward. Tighten the castle nut to specification and confirm the steering centers after installation.
What’s included
One right-hand outer tie rod end, sold individually.
Not included: Check the package for nuts, cotter pins and boots before installing.









