Overview
The Moog left-hand outer tie rod end ES3094L is a steering part sold individually. The outer tie rod end connects the steering link to the left knuckle, which lets the wheel pivot as the steering turns. It fits Jeep Cherokee XJ, Comanche, Grand Cherokee WJ, WK and ZJ, and Wrangler LJ, TJ and YJ models, each within its own year range.
MOOG says its Problem Solver line is built for like new steering, easy installation and longer life. The company describes its powdered metal gusher bearing as routing grease to the stud, a patented cover plate that allows tighter tolerances, and a full ball metal stud with 360 degrees of smooth rotation. Patent pending Sunoloy coated metal bearings are also described.
Key features
- Left-hand outer position.
- Gusher bearing routes grease to the stud
- Patented cover plate
- Full ball metal stud with 360 degrees of rotation
- Sold individually
Matching chassis and year
Jeep outer tie rod ends are chassis-specific, so the year and model range matter as much as the side. Across the XJ, the WJ and the TJ, the knuckle and steering arm geometry changed, and a left-hand end from one generation may not seat correctly on another. Before buying, write down the model, year and any chassis marking from the old part, and compare the stud taper and thread with what you removed.
Because the outer end works with the inner tie rod and the drag link, a worn outer end can hide wear elsewhere. Check the inner joint and the steering damper for play during the same job. On older Jeeps, rust around the knuckle bore is common, so clean the taper seat before pressing in the new stud. A clean, seated stud free of old grease helps the joint last.
- Stud taper and thread compared with the removed part
- Inner tie rod checked for play
- Knuckle taper cleaned before installation
Specifications
| Brand | Moog |
|---|---|
| Part number | ES3094L |
| UPC | 80066414522 |
| Product type | Outer tie rod end |
| Position | Left-hand outer |
| Listed applications | 1991 to 2001 Jeep Cherokee XJ; 1991 to 1992 Jeep Comanche; 1999 to 2005 Jeep Grand Cherokee WJ; 2006 Jeep Grand Cherokee WK; 1993 to 1998 Jeep Grand Cherokee ZJ; 2004 to 2006 Jeep Wrangler LJ; 1997 to 2006 Jeep Wrangler TJ; 1991 to 1995 Jeep Wrangler YJ |
| Sold as | Individually |
Vehicle fitment
It fits eight Jeep applications, each tied to a year range and chassis: Cherokee XJ, Comanche, Grand Cherokee WJ, WK and ZJ, and Wrangler LJ, TJ and YJ. Trim names do not determine fit. Match your year and chassis to one of those entries, and confirm the left side, because the right-hand part is a separate number.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A Jeep tie rod end changes toe, so a front alignment should be checked after replacement. Tighten the castle nut to specification and confirm the steering centers properly on a test drive.
What’s included
One left-hand outer tie rod end, sold individually.
Not included: Boots, nuts and cotter pins are outside this shipment.









