Overview
The Moog right-hand outer tie rod end ES3095R is a steering part sold individually. The outer tie rod end connects the steering link to the right knuckle, letting the right wheel pivot as the steering turns. It fits Jeep Cherokee XJ, Comanche, Grand Cherokee ZJ, and Wrangler LJ, TJ and YJ models, each with its own year range.
Moog’s Problem Solver line includes features for like new steering, simpler installation and longer life. Its powdered metal gusher bearing lets grease reach the stud, a patented cover plate allows tighter tolerances, and a full ball metal stud rotates through 360 degrees. Patent pending Sunoloy coated metal bearings give a smooth stud swing.
Key features
- Right-hand outer position.
- Gusher bearing that routes grease to the stud
- Patented cover plate
- Full ball metal stud rotating through 360 degrees
- Sold individually
Right-side wear and alignment
Outer tie rod ends carry steering motion to the wheel, so the right side often shows wear first on a vehicle that turns more to one direction. Watch for a loose feel at the wheel, a clunk when turning from lock to lock, or tire wear along the inner edge of the right front tire. Lift the front end safely and rock the wheel by hand to feel for play at the stud.
Replacing the right outer end alone is common, but check the inner tie rod, the drag link and the center link for wear in the same visit. A new outer end can only hold alignment if the surrounding joints are tight. Thread the new end to the length of the old one as a starting point, then have the toe set after installation. Keep the stud taper clean, and replace any nut or cotter pin that is damaged.
- Clunk when turning from lock to lock
- Inner edge wear on the right front tire
- Play at the stud when the wheel is rocked
Specifications
| Brand | Moog |
|---|---|
| Part number | ES3095R |
| UPC | 80066414539 |
| Product type | Outer tie rod end |
| Position | Right-hand outer |
| Listed applications | 1991 to 2001 Jeep Cherokee XJ; 1991 to 1992 Jeep Comanche; 1993 to 1998 Jeep Grand Cherokee ZJ; 2004 to 2006 Jeep Wrangler LJ; 1997 to 2006 Jeep Wrangler TJ; 1991 to 1995 Jeep Wrangler YJ |
| Sold as | Individually |
Vehicle fitment
It fits six Jeep applications with year ranges: Cherokee XJ, Comanche, Grand Cherokee ZJ, and Wrangler LJ, TJ and YJ. Trim names are not used for fit. Match your year and chassis to one of these entries, and confirm you need the right-hand outer position, since the left-hand part is a separate number.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing an outer tie rod end affects toe, so the front alignment should be checked afterward. Tighten the castle nut to specification and recheck the steering centering after a short drive.
What’s included
One right-hand outer tie rod end, sold individually.
Not included: Nuts, cotter pins and boots are not in the package.









