Overview
The Moog inner tie rod end ES3096L is a steering part sold individually for the front right inner position, where it connects to the pitman arm. The inner end lets the steering linkage move the wheel without binding, so play here affects steering feel and toe. It fits Jeep Cherokee XJ, Comanche, Grand Cherokee WJ and ZJ, 1991 and 1993 Grand Wagoneer SJ, and Wrangler LJ and TJ models.
MOOG says its Problem Solver line is designed for like new steering, easy installation and longer life. The company describes its powdered metal gusher bearing as routing grease to the stud, a patented cover plate that allows tighter tolerances, and a full ball metal stud with 360 degrees of smooth rotation. Patent pending Sunoloy coated metal bearings are also described.
Key features
- Front right inner position to the pitman arm
- Gusher bearing design.
- Patented cover plate.
- Full ball metal stud with 360 degrees of rotation.
- Sold individually
Inner joints and steering play
The inner tie rod end sits closer to the steering gear and is harder to see, so its wear often goes unnoticed until the steering feels loose or the tires scrub. Dust and water reach the inner joint through the boot, which is why boot condition deserves attention every time the front suspension is opened. A torn boot is an early sign that the joint needs attention before the play becomes noticeable.
Jeeps used off-road or with lift components put more work through the inner joints, which can wear them faster. Inspect the outer ends and the steering damper at the same time so the whole system is evaluated together. Use a torque wrench on the jam nut, and confirm the sleeve threads are clean before the new part is installed.
Specifications
| Brand | Moog |
|---|---|
| Part number | ES3096L |
| UPC | 80066414546 |
| Product type | Inner tie rod end |
| Position | Front right inner to pitman arm |
| Listed applications | 1991 to 2001 Jeep Cherokee XJ; 1991 to 1992 Jeep Comanche; 1999 to 2001 Jeep Grand Cherokee WJ; 1993 to 1998 Jeep Grand Cherokee ZJ; 1991 and 1993 Jeep Grand Wagoneer SJ; 2004 to 2006 Jeep Wrangler LJ; 1997 to 2006 Jeep Wrangler TJ |
| Sold as | Individually |
Vehicle fitment
It fits seven Jeep applications, each with a year range: Cherokee XJ, Comanche, Grand Cherokee WJ and ZJ, Grand Wagoneer SJ, and Wrangler LJ and TJ. Trim names do not determine fit. Match your year and chassis to one of these entries and confirm the front right inner position before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An inner tie rod end sets toe along with the outer end, so the front alignment should be checked after replacement. Inspect the boot and clamp at the same time, since the inner joint is exposed to road dirt.
What’s included
One inner tie rod end for the front right position, sold individually.
Not included: Check the package for boots, clamps and jam nuts before starting the installation.









