Overview
The Crown Automotive 52005741 is a left (driver side) tie rod end with left hand thread. It fits Jeep Cherokee XJ, Grand Cherokee ZJ and Wrangler YJ, TJ and LJ models. A tie rod end is the steering joint at the end of the tie rod that connects the steering linkage to the steering knuckle.
Crown Automotive describes itself as a manufacturer and distributor of replacement parts for Jeep vehicles for over 50 years, with over 8,000 part numbers, including many factory-discontinued items. This part is a direct fit replacement.
Key features
- Left (driver side) tie rod end
- Left hand thread
- Direct fit replacement
- Fits several Jeep Wrangler, Cherokee and Grand Cherokee generations
Steering joint wear
The tie rod end carries steering force between the linkage and the knuckle, and its ball joint wears over time, adding play to the steering. Play at the front wheels, a loose or wandering feel on the highway, and uneven front tire wear are common signs. Check the boot on the joint, since a torn boot lets grit in and speeds up wear.
Tie rod ends are often replaced together with the inner tie rod and steering damper when the steering is being rebuilt. After replacement, the toe setting must be checked with an alignment, as small changes in length affect tire wear and steering feel. Keep the threads clean and use the correct locking method.
- Looseness felt in the steering wheel
- Uneven front tire wear
- Torn or cracked boot
- Clunks over bumps
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52005741 |
| UPC | 848399013689 |
| Product type | Tie rod end |
| Position | Left (driver side) |
| Thread | Left hand thread |
| Fit type | Direct fit |
| Manufacturer part code | CRO52005741 |
Vehicle fitment
It fits these years and trims: 1991–2001 Jeep Cherokee (XJ) (Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport); 1993–1998 Jeep Grand Cherokee (ZJ) (Base, Laredo, Limited, Orvis, SE, TSi); 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon); 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X); 1991–1995 Jeep Wrangler (YJ) (Base, Islander, Renegade, Rio Grande, S, SE, Sahara).
This is the left (driver side) tie rod end with left hand thread. The right side is a different part. Compare the thread size, taper size and grease fitting with the old part when you remove it.
Fit applies to the XJ Cherokee, ZJ Grand Cherokee and Wrangler YJ, TJ and LJ years shown. Check fit against your vehicle’s year, model and trim first, and use a right side tie rod for the passenger side.
Installation notes
Steering components are safety-critical, so professional installation is the better choice. Use the correct torque for the fasteners, fit new cotter pins or locking hardware where needed, and have the alignment checked afterward. Re-check fasteners after the first miles of driving.
