Overview
It is a driver side outer tie rod end for the 2011 to 2017 Jeep Grand Cherokee (WK) and the 2018 Jeep Grand Cherokee. Its position is left, and it is a direct OE replacement.
Worn tie rod ends can cause loose steering and a clucking sound when accelerating or turning. This end is designed to replace a worn end of that kind.
Key features
- Driver side (left) outer position
- Direct OE replacement design.
- Fits 2011–2017 Grand Cherokee (WK) trims
- Fits 2018 Grand Cherokee trims
Signs of a worn outer end
The outer tie rod end sets the angle of the front wheel through the steering knuckle, so wear here shows up in the steering feel first. Common signs include a clunk when turning at low speed, a steering wheel that drifts off center and a faint clucking over bumps. Uneven tread wear on the front tires can also point to a loose outer end.
Confirm the problem before buying. Lift the front wheel and check for play at the outer joint, and look for a torn boot that has let grease escape. Once the new end is fitted, have alignment set, since the outer end controls toe and an incorrect setting will wear tires quickly.
- Clunks during slow turns
- Steering that pulls or drifts
- Uneven front tire wear
- Torn boot with grease loss
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18043.19 |
| UPC | 804314267537 |
| Position | Left (driver side) |
| Application | Direct OE replacement |
Vehicle fitment
The 2011 to 2017 Jeep Grand Cherokee (WK) is listed in 75th Anniversary, Laredo, Limited, Overland, Overland Summit, SRT, SRT8, Summit and Trailhawk trims. The 2018 Jeep Grand Cherokee is listed in Altitude, High Altitude, Laredo, Limited, Overland, SRT, Summit, Trackhawk and Trailhawk trims.
Later model years and the older Grand Cherokee generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the old end to this left position before you start, since the driver side and passenger side ends differ.
What’s included
One outer tie rod end. No other hardware is included, so check the package contents against your installation before starting.














