Overview
The Omix-Ada 18044.01 is a left tie rod end for the drag link to Pitman arm position on Jeep steering. It is a direct OE replacement built to original specifications, and it is made for 2 and 4-door models.
Omix-Ada provides a limited five year warranty. Confirm fit for your Jeep’s model year and chassis before ordering.
Key features
- Direct OE replacement design
- Built to original specifications
- Left position
- Drag link to Pitman arm end
- Limited five year manufacturer warranty
Drag link and Pitman arm wear
The drag link to Pitman arm joint moves with every steering input, so its end wears where the pivot meets the arm. Symptoms of wear include wandering, play in the steering wheel, and a rattle when turning slowly. Because the drag link transfers steering motion to the front wheels, worn ends can affect alignment and tire wear.
When replacing one end, inspect the drag link, the Pitman arm connection and the other tie rod ends at the same time. Tighten the castle nut to the torque in your service manual and install a new cotter pin.
- Inspect the drag link and Pitman arm together
- Check for play with the steering off center
- Replace worn cotter pins during the job
- Have toe alignment checked after the repair
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18044.01 |
| UPC | 804314237943 |
| Position | Left |
| Application | Drag link Pitman arm end |
| Body style | 2 and 4-door models |
| Warranty | Limited five year manufacturer warranty |
| Fitment | Direct fit (manufacturer listing) |
Vehicle fitment
Jeep is the make for this left tie rod end. Confirm fit for your model year and chassis before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the drag link to Pitman arm end matches your steering linkage before installing.
What’s included
One left tie rod end. No other hardware is stated.









