Overview
The Currie 3 Inch Johnny Joint Rebuild Kit, part number CE-9111RK, is a rebuild kit for a 3 inch Johnny joint. A rebuild kit is used to service a Johnny joint rather than replace the whole assembly.
Sizing a rebuild kit
A 3 inch Johnny joint is serviced in place by replacing the wear parts, so the rebuild kit is only useful when it matches the joint’s size and internal layout. Compare the parts you pull with the new ones before you begin, and note any differences in seal shape or stud length. A kit that looks close can still leave a joint loose or binding.
Look for play at the joint and moisture inside the seal to decide whether the rebuild is worth doing. Clean the housing and check the bore for scoring before assembly. Fresh grease should fill the joint without forcing the seal out, and the joint should move smoothly by hand before it goes back on the axle.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9111RK |
| UPC | 817783004008 |
| Joint size | 3 inch |
Vehicle fitment
Universal fit applies to this rebuild kit, so no model, year or chassis is tied to it. Check your axle and joint housing against the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.









