Overview
The TeraFlex 4107101 is a large weldable threaded insert with a left hand 1-1/4 Inches -12 thread, made for building custom control arm links. You weld the insert into control arm length tubing that has at least a 1-1/2 inch inside diameter.
TeraFlex sizes the large insert at 1-1/4 inch 12 tpi (threads per inch) for its large Monster ends, and the medium and small inserts at 7/8 inch 18 tpi. Match the thread and tube size before starting a build, because the large and smaller inserts are not interchangeable.
Key features
- Large size with 1-1/4 Inches -12 (12 tpi) threads
- Left hand thread direction
- Weld-in design for custom link building
- Requires tubing with a minimum 1-1/2 inch ID
Building a weld-in link
A weldable threaded insert gives a fabricated link its threaded end, so the quality of the weld matters as much as the thread itself. Clean the tube bore and the insert’s mating surface of mill scale, oil and paint before tacking. Set the insert square to the tube axis, because a cocked insert will bind when the jam nut is tightened and the link is adjusted.
Once welded, the threads should be checked with the mating end before the link goes into service. Chase the threads lightly if weld spatter is present, and confirm the jam nut seats fully. Heat from welding can change the thread fit, so a test fit after the weld cools is a sensible step.
- Weld with the tube and insert clean and dry
- Test fit the mating end after the weld cools
- Inspect welds for cracks after the first trail use
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4107101 |
| UPC | 843885025498 |
| Thread size | 1-1/4 Inches -12 (12 tpi) |
| Thread direction | Left hand |
| Minimum tube ID | 1-1/2 Inches |
| Jam nut | Not included |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for this insert, and TeraFlex marks it universal fit. It is a fabrication part rather than a bolt-in component, so suitability depends on the links you build instead of a model.
Use tubing at or above the 1-1/2 inch minimum ID for this large size, and check your link layout before welding. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep the large insert on tubing that meets the 1-1/2 inch minimum, since the smaller 7/8 inch inserts use a 1-1/8 inch minimum instead.
What’s included
One weldable threaded insert, part number 4107101.
Not included: Jam nut.









