Overview
The Moog ES3366T is a driver side front outer tie rod end for 1997–2003 Ford F-150 trucks and several related Ford and Lincoln models. It is a forged one-piece unit with a neoprene-sealed rubber dust boot.
Tie rods link the steering gear to the steering arm or spindle, so they affect how the vehicle turns and holds its alignment. This one has a one-piece forged design rather than the two-piece original style. Its neoprene-sealed rubber boot resists extreme temperatures and abrasion. Hardened full-ball studs and a boot valve for grease flushing complete the design.
The ES3366T is a driver side part, sold as a single unit rather than a pair. The passenger side outer tie rod end is a different part, even on the same truck, so confirm the side before installing. It fits from the 1997 F-150 and Expedition to the 2002 Lincoln Blackwood, including the F-150 Lightning.
Key features
- Driver side front outer tie rod end
- Forged one-piece unit
- Neoprene-sealed rubber dust boot
- Boot includes a valve for flushing grease
- Hardened full-ball metal studs
- Direct fit
Driver side considerations
A driver side outer tie rod end is one half of the steering linkage, so wear on it changes how the wheel tracks. Common symptoms are a loose feel at the steering wheel, wandering on the highway, and tire wear on the inside or outside edge. Checking the other side at the same time helps you spot wear that is building up evenly.
Heavier trucks and those with aftermarket wheels put more load on the outer ends, so inspection intervals matter more on them. Keep the steering rack boots and the center link in view during the same check, since a worn link can make a new outer end feel loose.
When fitting a replacement, make sure the threads and taper match the old part, and tighten the nut to the vehicle’s service specification. Store the old part until the new one is confirmed to be the correct side.
- Check the center link with the outer end
- Match threads and taper before fitting
- Confirm the side before installing
Specifications
| Brand | Moog |
|---|---|
| Part number | ES3366T |
| Product | Front outer tie rod end |
| Side | Driver side |
| Construction | Forged one-piece unit |
| Dust boot | Neoprene-sealed rubber |
| Studs | Hardened full-ball metal |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2002 Ford Expedition, the 1997–2003 Ford F-150, the 2004 Ford F-150 Heritage, the 1999–2003 Ford F-150 Lightning, the 1997–1999 Ford F-250 and the 2002 Lincoln Blackwood.
The fit covers the driver side only, for the years above. Passenger side models need a separate part, and 2004 and newer F-150s other than the Heritage are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Alignment is needed right away after replacing a tie rod end. This is a driver side part, so it does not replace the passenger side tie rod end. The boot has a small valve so old grease and contaminants can be flushed out.










