Overview
The Moog K80629 is a front lower ball joint, part number MOGK80629, that installs by pressing into the knuckle. It fits the 2007–2011 Dodge Nitro, the 2006–2010 Jeep Commander (XK), the 2005–2010 Jeep Grand Cherokee (WK) and the 2008–2012 Jeep Liberty (KK).
It is a lower joint, so it carries the load between the control arm and the knuckle on the lower side of the wheel. Owners of these Jeep and Dodge models who are replacing a worn lower joint can use it as a like-for-like part, with the grease fitting kept for regular service.
Key features
- Press-in type, so it is pressed into the knuckle
- Greasable socket that Moog says reduces corrosion and wear
- Ball stud hardened to handle higher loads
- Dust boot with an encapsulated Belleville washer
- Gusher bearing design that lets grease reach the stud
- Forged housing with extra material in the high-stress areas
Checking lower joint wear
The lower joint carries the weight of the front axle at the bottom of the knuckle, so wear here shows up in the feel of the steering and the tire tread. A worn joint often knocks over bumps, causes the tire to wear along one edge, or gives a loose feel at the wheel. Lifting the front tire and checking for movement at the joint is an easy first test.
Before ordering a replacement, look at the upper joint, tie rod ends and wheel bearings, since worn parts are often replaced together on these trucks and SUVs. Press-in joints also need a clean bore and proper pressing tools. Lubrication through the fitting after installation helps the new socket last.
- Check upper joint and tie rod ends
- Lift the tire and test for play at the joint
- Clean the knuckle bore before pressing
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK80629 |
| Position | Front lower |
| Joint type | Press-in |
| Lubeable | Yes |
| Housing | Forged, with up to 52% more material in key areas |
Vehicle fitment
These are the vehicles it fits: the 2007–2011 Dodge Nitro, the 2006–2010 Jeep Commander (XK), the 2005–2010 Jeep Grand Cherokee (WK) and the 2008–2012 Jeep Liberty (KK).
Jeep Wrangler, Cherokee and Dodge Ram models are not on this list, and the Liberty years outside 2008 to 2012 are not covered by it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
As a press-in joint, it needs a press or the correct installation tools to seat it in the knuckle. Grease the joint through the fitting once it is in place.
What’s included
One Moog front lower ball joint, part MOGK80629.










