Overview
It fits the 1991–2001 Jeep Cherokee (XJ), the 1991–1992 Jeep Comanche (MJ) and the 1993–1998 Jeep Grand Cherokee (ZJ). It is sold individually.
The Problem Solver design uses a powdered metal gusher bearing, which lets grease flow through the bearing to the stud, and a full ball metal stud for smooth rotation. The joint is lubeable.
The Problem Solver design pairs a gusher bearing with a full ball metal stud to reduce friction and support smooth movement. It is designed for easier installation and longer service life.
Moog’s wording for the stud is 360 degrees of smooth, consistent, rotational movement, which it links to more responsive steering.
Key features
- Upper ball joint
- Lubeable
- Gusher bearing lets grease flow through the bearing to the stud
- Full ball metal stud for 360-degree rotation
- Coated metal bearings
- Sold individually
- Gusher bearing path that lets grease reach the stud
Lubrication and joint wear
Ball joints carry steering and suspension loads, so wear at the stud shows up as looseness in the steering or uneven tire wear at the front. Check for play by lifting the front tire and feeling for movement at the joint, and look for torn boots or grease leaking from the seal. A lubeable joint should be greased on the service schedule for the vehicle, since neglected grease is a common cause of early failure.
Ball joints are often replaced in pairs on the same axle, since the other side has seen the same miles and wear. When a joint is replaced, check the control arm bushings, tie rod ends and alignment too, because worn parts affect how the new joint wears. Tighten the stud nut to the value in a service manual.
- Check for play at the front tire
- Look for torn boots or grease leaks
- Consider replacing both sides together
Specifications
| Brand | Moog |
|---|---|
| UPC | 80066271620 |
| Position | Upper |
| Lubeable | Yes |
| Sold | Individually |
| Cover plate | Patented design. |
| Bearings | Coated metal |
Vehicle fitment
Fitment covers the 1991–2001 Jeep Cherokee (XJ), the 1991–1992 Jeep Comanche (MJ) and the 1993–1998 Jeep Grand Cherokee (ZJ).
Fit for Wagoneer and Grand Wagoneer is not established for this joint, so verify your vehicle’s year, model and trim first.
What’s included
One upper ball joint, sold individually.









