Overview
The Moog K6117T is a press-in front lower ball joint for 1971–1974 Chevrolet C10 pickups and Suburbans, 1971–1974 Chevrolet Blazers, 1975–1982 Chevrolet K5 Blazers, and 1971–1974 GMC C15 and C1500 pickups and Suburbans.
The joint is greasable. It has a powdered metal bearing that moves grease to the stud and a patent-pending dust boot. It fits the early 1970s Chevrolet C10 and Blazer, GMC C15 and C1500 pickups and Suburbans, and the 1975–1982 K5 Blazer.
The joint has a larger grease reservoir and a pre-tapped grease fitting hole for easier maintenance. The greasable socket reduces corrosion and wear by letting new lubricant flush contaminants out.
Key features
- Press-in type
- Greasable joint with a larger grease reservoir
- Hardened ball stud.
- Patent-pending dust boot with encapsulated Belleville washer
Restoring an older front end
Older trucks often have ball joints that have worked in road grit and water for decades. Once the boot cracks, the stud and bearing wear quickly, and the joint can start to clunk or let the front wheels wander. Replacing the joint on both sides at the same time keeps the steering consistent, and inspecting the control arm bushings helps catch other age-related wear.
Press-in joints need the control arm removed or supported and pressed straight into a clean bore. Before fitting, check that the arm has no cracks or bent areas. Because older trucks are often modified or partly restored, check the mounting points and fasteners against your vehicle before starting.
- Cracked or hardened dust boot
- Clunking over bumps
- Wander at highway speeds
- Uneven tire wear on the front axle
Specifications
| Brand | Moog |
|---|---|
| Part number | K6117T |
| Position | Front lower |
| Installation type | Press-in |
| Lubeable | Yes |
Vehicle fitment
The K6117T fits these vehicles:
- 1971–1974 Chevrolet Blazer (Base) and C10 pickup (Base)
- 1971–1974 Chevrolet C10 Suburban (Base)
- 1975–1982 Chevrolet K5 Blazer (Base, Cheyenne, Custom, Custom Deluxe, Deluxe and Silverado)
- 1971–1974 GMC C15/C1500 pickup (Base) and C15/C1500 Suburban (Base)
Vehicles from 1983 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joint is a press-in type, so the control arm must be pressed or supported during installation. The grease fitting goes into the pre-tapped hole.
What’s included
Check the package contents against your installation before starting.










