Overview
The Moog K3199 is a front lower ball joint for the 2002 and 2004 Jeep Liberty (KJ). It is press-in and greasable, and it has a hardened ball stud.
The greasable socket lets fresh lubricant flush contaminants out of the joint. The housing has extra material in key areas and is designed for performance at or above original equipment levels.
Key features
- Press-in installation
- Greasable socket
- Hardened ball stud for higher loads.
- Housing with more material in key areas.
- Designed to meet or exceed original equipment performance.
Before pressing in a new joint
Press-in joints depend on a clean, true bore in the control arm. Rust, paint or a worn seat can cause a new joint to sit crooked, which loads the stud and boot unevenly. Clean the bore thoroughly, check that the joint is oriented correctly, and press it in straight with a suitable tool so the housing seats fully.
Old joints are often worn in ways that show up only under load. If the wear was caused by a bent arm or a damaged bushing, a new joint alone will not fix the problem, so inspect the surrounding suspension parts. Keep the new boot clean during installation, and grease the joint on the schedule your vehicle’s maintenance calls for once it is back on the ground.
- Clean the bore of rust and debris
- Confirm the joint orientation before pressing
- Use a press or tool suited to the arm
- Torque fasteners to the value for your vehicle
Specifications
| Brand | Moog |
|---|---|
| Part number | K3199 |
| Position | Front lower |
| Installation type | Press-in |
| Lubeable | Yes |
Vehicle fitment
The K3199 fits these vehicles:
- 2002 and 2004 Jeep Liberty (KJ), in Limited, Renegade and Sport versions
Other Liberty years and Jeep models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joint is pressed into the lower control arm. Check the arm’s bore and the joint’s orientation before pressing.
What’s included
Check the package contents against your installation before starting.










