Overview
The Moog K6696 is a front upper ball joint for 1999–2010 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups, 1999–2010 GMC Yukon and 2000–2010 Yukon XL 1500, 2000–2010 Chevrolet Suburban 1500, and 2007–2010 Chevrolet Avalanche. It also covers 2003–2007 Hummer H2 and 1999–2001 AM General Hummer vehicles.
It joins the upper control arm to the steering knuckle. It has a full ball metal stud for smooth rotation and a cover plate design built for close tolerances.
Key features
- Front upper position
- Lubeable joint
- Full ball metal stud for smooth rotation.
- Cover plate design that Moog says has tighter tolerances than traditional designs
Upper joint wear and load
The upper ball joint sits at the top of the steering knuckle and carries the load of the upper control arm, which makes it a key point for alignment and wheel control. Wear at this joint often shows up as a clunk when the wheel is turned, a loose steering feel, or uneven tire wear on the inside or outside of the tread. Checking the stud for play with the weight off the joint is a simple first step.
Upper and lower joints on the same axle are usually checked together, because both carry the load as a pair. When replacing an upper joint, verify the press-in orientation and seating before loading the axle, and expect to recheck the alignment afterward. A new joint with a grease fitting can be lubricated at the service interval used for your vehicle.
Specifications
| Brand | Moog |
|---|---|
| Part number | K6696 |
| UPC | 80066322285 |
| Position | Front upper |
| Lubeable | Yes |
| Quantity | One per package |
Vehicle fitment
The K6696 fits these vehicles:
- 1999–2001 AM General Hummer and 2003–2007 Hummer H2
- 2007–2010 Chevrolet Avalanche
- 1999–2010 Chevrolet Silverado 1500 and 2007 Silverado 1500 Classic
- 2000–2010 Chevrolet Suburban 1500
- 1999–2010 GMC Sierra 1500, 2007 Sierra 1500 Classic, and 1999–2010 GMC Yukon
- 2000–2010 GMC Yukon XL 1500
2500 and 3500 trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Moog says its instruction sheets give the press-in orientation for this joint where that step applies. Read the sheet before pressing the joint into the arm.
What’s included
Inspect the joint and any hardware in the box before you begin pressing it in.









