Overview
The Moog K500250 is a press-in front lower ball joint for the 2006–2010 Hummer H3 and 2009–2010 Hummer H3T. It has a hardened ball stud and a greasable socket.
The joint has a patent-pending dust boot and a powdered metal bearing that carries grease to the stud. A larger grease reservoir makes maintenance easier. The housing is forged with up to 52% more material in key areas, and the greasable socket lets new lubricant flush contaminants out of the joint, which helps reduce corrosion and wear.
Key features
- Press-in type
- Hardened ball stud
- Greasable socket
- Patent-pending dust boot.
- Larger grease reservoir and pre-tapped grease fitting hole
- Powdered metal bearing that carries grease to the stud
Working on the H3 front end
On a truck-based SUV, the lower joint carries load under braking and over uneven ground, so wear tends to show as a knock over bumps or a loose feel at the wheel. When the wheel is lifted and rocked, any play at the joint is easy to spot. Old grease that is dark or gritty suggests contaminants have been getting into the socket.
Before pressing in a new joint, clean the control arm bore and check it for cracks or distortion. The arm should be supported so the press force goes straight through the joint. Because the greasable socket relies on a sealed boot, inspect the boot for tears and fit the grease fitting before installing the joint. Upper ball joints and tie rod ends are often worth checking at the same time.
- Inspect the bore for cracks or distortion
- Support the control arm during pressing
- Check the boot and grease fitting before installing
Specifications
| Brand | Moog |
|---|---|
| Part number | K500250 |
| Position | Front lower |
| Installation type | Press-in |
| Lubeable | Yes |
Vehicle fitment
It fits these vehicles:
- 2006–2010 Hummer H3 (Alpha, Base, Championship Series and X)
- 2009–2010 Hummer H3T (Alpha and Base)
The Hummer H2 and H1 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joint is pressed into the arm. The housing has a pre-tapped grease fitting hole, which Moog says makes the fitting easier to install.
What’s included
Check the package contents against your installation before starting.










