Overview
The Moog K90262 is a front left lower ball joint for 1995–2002 Toyota 4Runner Base, Limited and SR5 models and 2000–2002 Toyota Tundra Base, Limited and SR5 trucks. It is a bolt-on joint with a hardened ball stud.
The joint is built to meet or exceed original equipment performance and has a premium forged housing. It is lubeable, so grease can be added during routine service.
Key features
- Bolt-on type
- Hardened ball stud made of OE-equivalent or better materials.
- Straightforward bolt-on installation
- Forged housing with up to 52% more material in key areas
- Design and construction validated by Moog engineers
Lower ball joint wear and inspection
The lower ball joint carries the weight of the truck at the bottom of the front suspension, so wear there affects steering, tire wear and braking feel. Common signs include clunking over bumps, a wobble at the wheel, and uneven tread on the inside or outside edge of the tire. A joint with excessive play should be replaced rather than tightened.
Inspect the dust boot regularly. A torn boot lets water and grit into the joint, which can wear the ball stud faster. Because this joint can be greased, adding fresh lubricant during routine service helps flush out contaminants and keeps the stud moving freely.
Lower and upper ball joints wear at different rates, so it is worth checking both when the front end is serviced. Replacing a joint usually means getting a new alignment afterward, since changing the joint can shift the front wheel angles.
- Check the dust boot for tears
- Grease the joint during routine service where equipped
- Get an alignment after replacement
Specifications
| Brand | Moog |
|---|---|
| Part number | K90262 |
| Position | Front left lower |
| Installation type | Bolt-on |
| Lubeable | Yes |
Vehicle fitment
It fits these Toyota trucks:
- 1995–2002 Toyota 4Runner (Base, Limited, SR5)
- 2000–2002 Toyota Tundra (Base, Limited, SR5)
The Tacoma and later 4Runner and Tundra years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Being a bolt-on type, the joint attaches to the arm with fasteners and does not need to be pressed in. Follow the service procedure for your vehicle before removing the old joint.
What’s included
Confirm the package contents match your installation before starting.










