Overview
The Mickey Thompson Classic III 15×8 is a polished aluminum truck wheel, 15 inches in diameter and 8 inches wide, with a 6 on 5.5 bolt pattern. Part number M/T90000001760 has a 106 center bore, -22 offset and 3.7 backspacing.
Polished hand holes give the face a distinctive look. The wheel carries an M/T stamp of quality and a limited lifetime warranty, and it has a high load rating.
Key features
- Highly polished face with matching polished hand holes
- Aluminum construction in Hole style
- M/T stamp of quality and limited lifetime warranty
- High load rating
- 8-inch width and 15-inch diameter for a 6 on 5.5 bolt pattern
Choosing the right wheel fit
Wheel fit comes down to three numbers working together. Bolt pattern must match the hub exactly, center bore should center the wheel on the hub so the load sits on the hub rather than the studs, and offset controls how far the face sits inside or outside the fender. Changing offset moves the wheel’s position, which affects brake caliper clearance, steering geometry and how the tire rubs at full lock. Backspacing gives a second view of the same issue from the mounting face.
Load rating matters most for heavy trucks, towing and trail use, where the wheel carries extra weight on rough ground. Pair the wheel with a tire whose load index suits the wheel’s rating, and confirm the tire fits the 15-inch by 8-inch size. Lug nuts or studs with the right seat type are a separate purchase, so check them before mounting.
- Bolt pattern matches the hub before anything else
- Brake caliper clearance checked after mounting
- Tire load index suited to the wheel
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001760 |
| Wheel diameter | 15 inches |
| Wheel width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | -22 |
| Backspacing | 3.7 |
| Style | Hole |
| Finish | Polished |
| Construction | Aluminum |
| Load rating | High (no figure listed) |
Vehicle fitment
Fitment is marked Universal Fit. Bolt pattern, center bore and offset decide how a wheel mounts, so check those three figures against your hub before choosing it.
Center caps are not available for 1997 and earlier Ford 3/4 and 1-ton pickups, 2002 and earlier Dodge/Ram 3/4 and 1-ton pickups, 1997 and earlier Toyota Land Cruiser models, or 1986 and earlier Jeep CJ models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Mickey Thompson Classic III wheel in the 15×8 size with a polished finish.
Not included: Lug nuts and other hardware are not part of this wheel. Gather hardware that matches your hub before mounting.









