Overview
The Mickey Thompson Sidebiter II 15×10 wheel, part number M/T90000019383, is an aluminum wheel with a 5 on 4.5 bolt pattern, an 87 center bore, a -48 offset and 3.17 backspacing. It carries a universal fit marking, so the bolt pattern and bore need to be checked against your hub.
The design takes its name from Mickey Thompson’s SideBiter tread-on-the-sidewall tire. It is a heavy duty wheel with a high gloss black finish that is easy to clean.
Key features
- Heavy duty aluminum construction
- High gloss finish that is easy to clean
- Styling inspired by the SideBiter tire design
- Limited lifetime warranty from Mickey Thompson
Wide wheels and tire rub
A 10-inch wide wheel with negative offset pushes the tire outward and can put the sidewall close to the fender or suspension at full lock. Measure the gap between the tire and the fender edge with the vehicle loaded, then check it again after a suspension change or a larger tire. Small adjustments in offset can change clearance noticeably.
Heavy duty construction helps a wheel resist bending on rough trails, but it does not change how the wheel fits. Look for rubbing marks on the inner tire wall after off-road runs, which signal contact with a body or suspension part. Torque wheel bolts after the first drives and inspect the lip for dents that can affect bead sealing.
- Check fender and steering clearance at full lock
- Inspect inner tire walls for rub marks
- Retorque wheel nuts after the first few drives
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000019383 |
| Style | Sidebiter II |
| Finish | Black, high gloss |
| Construction | Aluminum |
| Wheel diameter | 15 inches |
| Wheel width | 10 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 87 |
| Offset | -48 |
| Backspacing | 3.17 |
Vehicle fitment
No specific vehicle is named, since the wheel is universal fit. The -48 offset places it further outboard than a standard wheel, so check tire and fender clearance on your vehicle.
Some older Ford 3/4 and 1-ton pickups, Dodge/Ram 3/4 and 1-ton pickups, Toyota Land Cruisers and Jeep CJs cannot take a center cap. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 10-inch width with -48 offset changes how the tire sits, so confirm tire rub and suspension clearance before driving. Verify the 5 on 4.5 pattern and 87 bore against your hub.
What’s included
Confirm whether a center cap and lug hardware are needed for your installation, and buy them separately if they are not included in your kit.
Not included: Tires are not part of this wheel.









