Overview
The Mickey Thompson Classic III 17×9 wheel in satin black, part number M/T90000001795, is a 17-inch aluminum truck wheel with a 5 on 5.5 bolt pattern, a 106 center bore, a -12 offset and 4.5 backspacing. It is a universal fit wheel, not built for one specific vehicle, so the bolt pattern and bore must match your hub before you choose it.
The Classic III pairs a clear-coated satin black face with polished hand holes for contrast. Mickey Thompson rates it for high loads and backs it with a limited lifetime warranty, and the wheel carries the brand’s M/T stamp of quality.
Key features
- Satin black finish protected by a clear coat
- Polished hand holes for contrast against the black face
- High load rating
- Aluminum construction
- Limited lifetime warranty from Mickey Thompson
Offset and clearance basics
Offset sets how far the wheel face sits relative to the hub mounting surface, and backspacing describes how far the inner barrel reaches toward the suspension and brakes. On a wheel with a negative offset like this one, the face moves outward, which changes tire position in the fender and can affect steering and tire rub. Check the wheel against brake calipers, control arms and the inner fender before mounting.
Load capacity matters most when a truck carries a heavier payload or tows, so match the wheel’s rating to the vehicle’s axle weight. Use lug nuts with the seat type made for this wheel and retorque after the first few drives. Aluminum wheels can be damaged by curbs and rocks, so inspect the barrel and bead for cracks after trail use.
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001795 |
| Style | Classic III |
| Finish | Satin black with clear coat |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 106 |
| Offset | -12 |
| Backspacing | 4.5 |
Vehicle fitment
This is a universal fit wheel, not built for one specific year, make or model. Fit depends on the 5 on 5.5 bolt pattern, the 106 center bore and the -12 offset relative to your hub and clearance.
Center caps are not available for 1997 and earlier Ford 3/4 and 1-ton pickups, 2002 and earlier Dodge/Ram 3/4 and 1-ton pickups, 1997 and earlier Toyota Land Cruiser models, and 1986 and earlier Jeep CJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 5 on 5.5 bolt pattern and 106 center bore match your hub, and confirm the -12 offset and 4.5 backspacing clear your brakes and suspension before mounting.
What’s included
This package is the wheel only, with no center cap, lug nuts or tire included.
Not included: Tires, lug nuts and center caps are not part of this package.









