Overview
The Classic III 16×8 is a polished aluminum hole-style truck wheel, part number M/T90000001774, with an 8 on 6.5 bolt pattern, a 125 center bore and an offset of -12. It suits truck owners who want a highly polished finish with polished hand holes, and it carries the Universal Fit marking.
The wheel carries an M/T stamp of quality and a limited lifetime warranty. It is built for high loads, and the polished hand holes give the face a distinctive look.
Key features
- Highly polished finish with matching polished hand holes.
- Aluminum construction in a 16-inch diameter and 8-inch width.
- 8 on 6.5 bolt pattern with a 125 center bore.
- Offset of -12 and backspacing of 4.
- High load rating.
- Limited lifetime warranty.
Wheel care for polished finishes
A polished aluminum face keeps its shine with regular washing and an occasional protective coating. Road grime and brake dust can etch the surface over time, so a gentle wash each week in harsh conditions helps prevent dullness. Hand holes collect dirt in their recesses, so a soft brush reaches them better than a cloth alone.
Polished surfaces can show water spots and mineral marks, especially in areas with hard water. Dry the wheel after washing and avoid letting cleaner dry on the surface. Inspect the rim edge and bead area for scuffs during tire changes, since those spots can be harder to polish out later.
- Wash often and dry the surface after cleaning
- Brush the hand holes to clear trapped dirt
- Use a wheel-safe protectant on polished areas
- Inspect the rim edge during tire service
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001774 |
| Series | Classic III |
| Style | Hole |
| Finish | Polished |
| Construction | Aluminum |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -12 |
| Backspacing | 4 |
| Load rating | High |
| Warranty | Limited lifetime |
| Fitment | Universal Fit |
Vehicle fitment
Fitment is universal, and no particular truck or Jeep is named. Match the 8 on 6.5 bolt pattern and 125 center bore to your hub, then check the -12 offset and 4 backspacing against your brake and suspension clearance.
Center caps are not available for several older applications, so check your model year if you plan to run them.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mickey Thompson lists four restricted groups: 1997 and earlier Ford 3/4 and 1-ton pickups, 2002 and earlier Dodge/Ram 3/4 and 1-ton pickups, 1997 and earlier Toyota Land Cruiser models, and 1986 and earlier Jeep CJ models.
What’s included
Tires, lug nuts and center caps are not part of this wheel. It comes as a single wheel.









