Overview
The Sidebiter Lock 20×9 wheel, part number M/T90000031072, is a 20-inch aluminum wheel with a 9-inch width, an 18 offset and a 5.75 backspacing. It carries 6×135 and 6×5.5 bolt pattern names, and its specification is 6 on 135. It belongs to the Sidebiter line, styled after the SideBiters tread-on-the-sidewall tire design. Check which pattern matches your hub before mounting.
The Sidebiter Lock has a satin black finish with machined accents. It is a heavy duty wheel with an easy to clean finish, styled for a Jeep, truck or 4×4. Because only Universal Fit is shown, check the bolt pattern, offset and backspacing against your hub and clearance before mounting.
Key features
- 20 by 9 inch aluminum wheel in the Sidebiter Lock style
- Satin black finish with machined accents
- Easy to clean finish described by the brand
- Bolt pattern 6 on 135, with 6×5.5 also in the name
- 18 offset and 5.75 backspacing
- Universal Fit designation with no specific vehicle named
Matching the bolt pattern
Bolt pattern is the first fit check for any six-lug wheel. Two pattern names with similar numbers can look interchangeable, but a stud that does not seat correctly can loosen or damage the hub. Measure the hub center to center across the studs before mounting, and make sure the lug nuts match the seat type of the wheel.
An 18 offset places the mounting face in a set position, so the tire sits in a slightly different place than a wheel with more negative or positive offset. Check that the setup clears the fender and brake parts at full steering lock. After the first drives, re-check lug torque and look for loose or cracked studs.
- Confirm the bolt pattern by measuring
- Check offset against fender clearance
- Re-torque lugs after first drives
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000031072 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Style | Sidebiter Lock |
| Construction | Aluminum |
| Finish | Satin Black |
| Bolt pattern | 6 on 135 (title: 6×135/6×5.5) |
| Offset | 18 |
| Backspacing | 5.75 |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit is the only fitment listed, with no year, make or model named, so the wheel is not vehicle-specific. Match the bolt pattern to your hub (6×135 and 6×5.5 are both named), and check the 18 offset and 5.75 backspacing against your clearance before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
What’s included
Only the wheel is covered here. Not included: no tire, lug nut or center cap is named with this wheel.









